We never sell your data to third parties
SKF 7004 ACD/P4A super-precision angular contact ball bearing, 20mm bore, 25° contact angle, ABMA Class 9. Non-metallic cage. Designed for combined radial and axial loads in machine tool spindles and precision equipment.
MODEL 7004 ACD/P4A
$219.17 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Attainable Speed for Grease Lubrication
38000 r/min
Attainable Speed for Oil-air Lubrication
60000 r/min
Basic Dynamic Load Rating
8.32 kN
Basic Static Load Rating
4.15 kN
Bore Diameter
20 mm
Cage
Non-metallic
Coating
Without
Contact Angle
25 °
Contact Type
Normal contact (two-point contact)
Design
High-capacity D
Dimension Type
Metric
I.D.
7/9 in
Inner Diameter (mm)
20.000
Lubricant
None
Lubricant (in Bearing)
None
Matched Arrangement
No
Matched Condition (axial Clearance/ Preload)
Not applicable
Material
Bearing steel
Material/Treatment
Bearing steel
Number of Rows
1
O.D. (in)
1 2/3
Outer Diameter (mm)
42.000
Pack Height
52 mm
Pack Length
50 mm
Pack Width
19 mm
Relubrication Feature
Without
Ring Type
One-piece
Sealing
None
Tolerance Class
P4A
Type
Normal contact (two-point contact)
Universal Matching Bearing
No
Width
12 mm
Width (mm)
12.000
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
| Brand | Boston Gear |
| Model | RF732-60F-B7-H |
| Brand | Harwal |
| Model | 110 x 135 x 15U45 |
| Brand | Brook Crompton |
| Model | BC2M7.5V4D |
| Brand | Boston Gear |
| Model | SSF732B-20-B7-GS |
| Brand | Consolidated Bearings |
| Model | 51115 P/5 |
Disclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF