We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
SKF 6206-RS1Z/C3GJN 30mm bore deep groove ball bearing, sealed one side with an NBR contact seal and shielded on the other side. Features a pressed steel cage and C3 greater-than-normal clearance. Pre-lubricated with polyurea grease (GJN) for electric motors, pumps, and general industrial applications.
MODEL 6206-RS1Z/C3GJN
Returnable:No
Cage
Steel
Clearance
C3 Loose
I.D.
1.181 in
O.D. (in)
2.441
Pack Height
67 mm
Pack Length
65 mm
Pack Width
22 mm
Bearings The SKF 6206-RS1Z/C3GJN Bearing is a premium quality component designed to deliver exceptional performance in a variety of applications. Known for its robust construction and advanced engineering, this bearing is a vital part of rotating machinery, ensuring smooth operation and increased efficiency.
Key Features
| Type | Deep groove ball bearing, specifically designed for high radial loads and moderate thrust loads. |
|---|---|
| Seal Design | Features a rubber seal (RS1) on one side, providing excellent protection against dust and moisture while retaining lubrication. |
| C3 Clearance | Designed with a greater than normal radial internal clearance, accommodating thermal expansion and misalignment. |
| Dimensions | Inner diameter of 30 mm, outer diameter of 62 mm, and width of 16 mm, ideal for various machinery configurations. |
| Material | Constructed with high-quality steel for enhanced durability and resistance to wear, ensuring longevity in demanding environments. |
Applications
| Automotive Industry | Widely used in vehicles for wheel hubs, transmissions, and engine components. |
|---|---|
| Industrial Machinery | Suitable for electric motors, pumps, and gearboxes, especially in applications requiring high reliability. |
| Construction Equipment | Ideal for use in heavy machinery where durability and performance are critical. |
| Compatibility | Designed to be interchangeable with other bearings in the 6200 series, providing flexibility in maintenance and repairs. |
Benefits
| Enhanced Performance | The SKF 6206-RS1Z/C3GJN bearing minimizes friction and heat generation, leading to improved energy efficiency and machinery performance. |
|---|---|
| Durability | With its robust design and material selection, this bearing offers long service life, reducing downtime and maintenance costs. |
| Reliability | Engineered to meet high standards of precision and quality, ensuring consistent performance under various operational conditions. Product information compiled with AI assistance for reference purposes. |
SKU: 320006
Bearing purchase
Good price and fast delivery!! Also a pleasure doing business with MROSupply.com!!
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What are the dimensions and typical uses of a 6200 series ball bearing?
A standard 6200 ball bearing has: • 10 mm bore • 30 mm outer diameter • 9 mm width The 6200 series sits within the deep groove ball bearing family and is designed for light to moderate loads at relatively high speeds. You’ll typically find them in electric motors, small gearboxes, pumps, and general industrial equipment. They’re popular because they’re compact, widely available, and cost effective. Different variants exist such as sealed, shielded, or high clearance versions, depending on the application.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
| Brand | NK North America Inc. |
| Model | K2120.9511403X30 |
| Brand | Superlok |
| Model | SHCVI1-S4-10P |
| Brand | NK North America Inc. |
| Model | K2127.25211A3X50 |
| Brand | NK North America Inc. |
| Model | K2127.15311A2X40 |
SKU: 320006
Bearing purchase
Good price and fast delivery!! Also a pleasure doing business with MROSupply.com!!
Read moreDisclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF