We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
SKF 6312-RS1Z/C4S0GJN6 60mm bore deep groove ball bearing sealed on one side with an NBR contact seal and shielded on the other. Features C4 clearance, pressed steel cage, heat stabilized to 150°C with high-temperature grease. Suitable for electric motors and pumps.
MODEL 6312-RS1Z/C4S0GJN6
$259.19 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Basic Dynamic Load Rating
85.2 kN
Basic Static Load Rating
52 kN
Bearing Material
Bearing steel
Bearing Outer Ring Locating Feature
None
Bore Diameter
60 mm
Bore Type
Cylindrical
Cage
Steel
Clearance
C4
Coating
Without
Filling Slots
Without
I.D.
2.362 in
Inner Diameter (mm)
60.000
Limiting Speed
3400 r/min
Lubricant
Grease
Matched Arrangement
No
Number of Rows
1
O.D. (in)
5.118
Outer Diameter (mm)
130.000
Pack Height
146 mm
Pack Length
144 mm
Pack Width
40 mm
Relubrication Feature
Without
Seal Type
Contact
Sealing
Seal on one side, shield on the other
Sealing Type
Contact
SKF Performance Class
SKF Explorer
Tolerance Class
Normal
Width
31 mm
Width (mm)
31.000
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
| Brand | FYH Bearing |
| Model | SALFH20515FP7 |
Disclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF