We never sell your data to third parties
SKF 2204 E-2RS1TN9/C3 is a 20mm bore self-aligning ball bearing with double contact seals (NBR) and C3 clearance. It features a glass-fiber-reinforced polyamide cage (TN9) and enhanced capacity design. Suitable for applications with shaft misalignment or deflection.
MODEL 2204 E-2RS1TN9/C3
$147.82 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Basic Dynamic Load Rating
12.7 kN
Basic Static Load Rating
3.4 kN
Bearing Material
Bearing steel
Bearing Outer Ring Locating Feature
None
Bore Diameter
20 mm
Bore Type
Cylindrical
Cage
Non-metallic
Coating
Without
Inner Ring Retaining Feature
None
Limiting Speed
10000 r/min
Lubricant
Grease
Number of Rows
2
O.D.
47 mm
Pack Height
62 mm
Pack Length
60 mm
Pack Width
23 mm
Radial Internal Clearance
C3
Reference Speed
28000 r/min
Relubrication Feature
Without
Sealing
Seal on both sides
Sealing Type
Contact
Tolerance Class
Normal
Width
18 mm
Self-aligning ball bearing with seals on both sides
Self-aligning ball bearings, with seals on both sides, have two rows of balls, a common sphered raceway in the outer ring and two deep uninterrupted raceway grooves in the inner ring. They are insensitive to angular misalignment of the shaft relative to the housing. The integral sealing can significantly prolong bearing service life because it keeps lubricant in the bearings and contaminants out.
- Accommodate static and dynamic misalignment
- Excellent high-speed performance
- Excellent light load performance
- Low friction
- Integral sealing results in reduced maintenance requirements and prolonged bearing service life
SKU: 320006
Bearing purchase
Good price and fast delivery!! Also a pleasure doing business with MROSupply.com!!
Read moreSKU: 2069041
Purchase of bearing
exactly what we needed and it showed up in only 1 day thank you so much.
Read moreSKU: 5830595
Skf bearing f4b 108-rm purchase
Great price and quick shipping for a high quality SKF bearing. Exactly what we needed.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
#828958
Brand
NTN Bearing
Model
2204EEG15
| Brand | MRO Supply |
| Model | 35-36/13 Black 8003721 |
SKU: 320006
Bearing purchase
Good price and fast delivery!! Also a pleasure doing business with MROSupply.com!!
Read moreSKU: 2069041
Purchase of bearing
exactly what we needed and it showed up in only 1 day thank you so much.
Read moreSKU: 5830595
Skf bearing f4b 108-rm purchase
Great price and quick shipping for a high quality SKF bearing. Exactly what we needed.
Read moreDisclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF