We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
SKF TIH 100M/MV is an induction heater for mounting bearings and other ring-shaped components. It heats parts quickly and evenly using electromagnetic induction, reducing installation time and preventing damage. Suitable for maintenance and repair workshops.
MODEL TIH 100M/MV
$7,999.04 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Bearing Support Arms
Yes, foldable
Coil Diameter
110 mm
Colour
Grey;Black
Cooling Fan
No
Demagnetisation after Heating (according SKF Norms)
< 2 A/cm
Dimensions (W X L X H)
230 x 570 x 350 mm
Error Guiding Codes
Yes
Heating performance example (bearing, weight, temperature, time)
23156 CC/W33, 97 kg, 110 °C, 20 min
Heating Temperature (max)
250 °C
Heating Temperature Control
0-250 °C
Heating Temperature Steps
1 °C
Heating Time Control
0.1-60 min
Heating Time Steps
0.1 min
Housing
Steel; Glass fibre filled polyamide
Main Yoke Type
Swivel yoke, 56 x 56 mm
Operating Area Height
205 mm
Operating Area Width
155 mm
Pack Height
100 mm
Pack Length
145 mm
Pack Width
205 mm
Power Consumption (max)
4.6 kVA
Power Setting
50%;100%
Remote Control Panel (wired)
Yes, with LED display
Temperature Measurement
Magnetic probe K-type
Thermal Overload Protection
Yes
Thermometer Mode
Yes
Time Mode
Yes
Voltage
400-460 V
Voltage Frequency
50-60 Hz
Workpiece Bore Diameter
20 mm
Workpiece Weight (max)
120 kg
Yoke Storage
Yes, internal
- Supplied with a swivel yoke and two smaller yokes, located in an integrated storage compartment
- Easy and safe to use with automatic temperature control or time controlled heating
- Automatic demagnetization reduces risk of bearing contamination
- Suitable for non-bearing applications for workpieces weighing up to 60 kg
- Automatic temperature hold function to keep the bearing hot after completion of the heating cycle
SKU: 319331
Agradecimiento.
Excelente servicio, confiable, rápido y efectivo. Los seguiré llamando para mis necesidades.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | FYH Bearing |
| Model | UCFB207 22NP |
SKU: 319331
Agradecimiento.
Excelente servicio, confiable, rápido y efectivo. Los seguiré llamando para mis necesidades.
Read moreDisclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF