We never sell your data to third parties
SKF 3213 A-2Z is a 65mm bore double-row angular contact ball bearing with a 30° contact angle. It features steel shields on both sides for protection against contaminants. Designed for combined radial and axial loads in pumps, gearboxes, and industrial machinery.
MODEL 3213 A-2Z
$299.39 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Arrangement of Contact Angle (double-row Bearing)
Back-to-back (O)
Axial Internal Clearance
CN
Basic Dynamic Load Rating
80.6 kN
Basic Static Load Rating
73.5 kN
Bearing Material
Bearing steel
Bearing Outer Ring Locating Feature
None
Bore Diameter
65 mm
Cage
Sheet metal
Coating
Without
Contact Angle
30 °
Contact Type
Normal contact (two-point contact)
Limiting Speed
4800 r/min
Lubricant
Grease
Matched Arrangement
No
Number of Rows
2
O.D.
120 mm
Pack Height
126 mm
Pack Length
124 mm
Pack Width
44 mm
Reference Speed
5600 r/min
Relubrication Feature
Without
Ring Type
One-piece inner and outer rings
Sealing
Shield on both sides
Sealing Type
Non-contact
Universal Matching Bearing
No
Width
38.1 mm
Double row angular contact ball bearings, with seals or shields, correspond to a pair of single row angular contact ball bearings in a back-to-back arrangement, while requiring less axial space. Depending on the sealing execution, they can operate at high speeds and are more suitable than deep groove ball bearings for supporting large axial forces in both directions.
- High-speed capability
- Accommodate relatively high radial loads, high axial loads in both directions and tilting moments
- Suitable where a stiff bearing arrangement is required
- Require less axial space than equivalent pair of single row angular contact ball bearings
- Integral sealing prolongs bearing service life
SKU: 2069041
Purchase of bearing
exactly what we needed and it showed up in only 1 day thank you so much.
Read moreSKU: 319331
Agradecimiento.
Excelente servicio, confiable, rápido y efectivo. Los seguiré llamando para mis necesidades.
Read moreSKU: 2067505
Skf 6205-2z/gjn
Item is exactly what I was looking for. Like always you get high quality with SKF
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
#208580
Brand
Nachi Bearing
Model
5213ZZ
#5032973
Brand
NSK Bearings
Model
5213ZZ
#2889774
Brand
Rollway
Model
3213 ZZ
| Brand | Electra/Grove Gear |
| Model | GR8130011.00 |
| Brand | Bando |
| Model | 400-DS14M-1806 |
SKU: 2069041
Purchase of bearing
exactly what we needed and it showed up in only 1 day thank you so much.
Read moreSKU: 319331
Agradecimiento.
Excelente servicio, confiable, rápido y efectivo. Los seguiré llamando para mis necesidades.
Read moreSKU: 2067505
Skf 6205-2z/gjn
Item is exactly what I was looking for. Like always you get high quality with SKF
Read moreDisclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF