We never sell your data to third parties
SKF 3205 E/C3 is a 1 in bore double-row angular contact ball bearing with C3 clearance and an enhanced steel cage. Designed for combined radial and axial loads in both directions, it is suitable for pumps, gearboxes, and industrial machinery.
MODEL 3205 E/C3
$89.56 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
I.D.
1 in
Inner Diameter (mm)
25.000
O.D. (in)
2
Outer Diameter (mm)
52.000
Width (mm)
20.600
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
#1494506
Brand
Koyo Bearing
Model
5205
#2889744
Brand
Rollway
Model
3205 C3
#281256
Brand
NTN Bearing
Model
5205C3
#5032561
Brand
NSK Bearings
Model
3205JC3
#2174367
Brand
FAG Bearing
Model
3205BD.C3
| Brand | Adam Equipment |
| Model | EBL 32001e |
| Brand | Modicon |
| Model | BMXEHC0800 |
| Brand | Precision Twist Drill |
| Model | QC91GN21 |
Disclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF