We never sell your data to third parties
SKF 2222 K is a 110mm tapered bore self-aligning ball bearing with a 1:12 taper for adapter sleeve mounting. The two rows of balls run in a common spherical raceway in the outer ring, automatically compensating for shaft misalignment. Suitable for applications where shaft deflection or mounting misalignment is unavoidable.
MODEL 2222 K
$1,625.72 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Basic Dynamic Load Rating
124 kN
Basic Static Load Rating
52 kN
Bearing Material
Bearing steel
Bearing Outer Ring Locating Feature
None
Bore Diameter
110 mm
Bore Type
Tapered 1:12
Cage
Sheet metal
Coating
Without
Inner Ring Retaining Feature
None
Limiting Speed
4300 r/min
Lubricant
None
Number of Rows
2
O.D.
200 mm
Pack Height
215 mm
Pack Length
210 mm
Pack Width
63 mm
Radial Internal Clearance
CN
Reference Speed
6000 r/min
Relubrication Feature
Without
Sealing
Without
Tolerance Class
Normal
Width
53 mm
Self-aligning ball bearing with tapered bore
Self-aligning ball bearings, with a tapered bore, have two rows of balls, a common sphered raceway in the outer ring and two deep uninterrupted raceway grooves in the inner ring. They are insensitive to angular misalignment of the shaft relative to the housing, which can be caused, for example, by shaft deflection. The tapered bore facilitates ease of mounting via adapter sleeves or withdrawal sleeves.
- Ease of mounting via adapter sleeves or withdrawal sleeves
- Accommodate static and dynamic misalignment
- Excellent high-speed performance
- Excellent light load performance
- Low friction
SKU: 5830595
Skf bearing f4b 108-rm purchase
Great price and quick shipping for a high quality SKF bearing. Exactly what we needed.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
| Brand | System Plast |
| Model | 50208CSBR |
SKU: 5830595
Skf bearing f4b 108-rm purchase
Great price and quick shipping for a high quality SKF bearing. Exactly what we needed.
Read moreDisclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF