We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
The SKF 7012 FE/HCP4AH1DT is a 60mm bore angular contact ball bearing with a 15° contact angle, machined steel cage, and hybrid ceramic balls (HC). Designed for high-speed, high-precision applications such as machine tool spindles. This super-precision bearing offers enhanced capacity (FE) and is matched in a duplex set (DT) for back-to-back mounting.
MODEL 7012 FE/HCP4AH1DT
$1,847.40 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Basic Dynamic Load Rating
27.6 kN
Basic Static Load Rating
25.5 kN
Bearing Material
Hybrid (ceramic balls)
Bore Diameter
60 mm
Cage
Non-metallic
Coating
Without
Contact Angle
18 °
Contact Type
Normal contact (two-point contact)
Design
High-speed E
Lubricant
None
Matched Arrangement
Tandem <<
Matched Condition (axial Clearance/ Preload)
Not applicable
Number of Bearings in Matched Set
2
Number of Rows
2
O.D.
95 mm
Pack Height
105 mm
Pack Length
103 mm
Pack Width
50 mm
Ring Type
One-piece inner and outer rings
Sealing
Without
Tolerance Class
P4A
Universal Matching Bearing
No
Width
36 mm
These matched sets of two super-precision, high-speed, E design, single row angular contact ball bearings are available in a variety of arrangements. Compared to the equivalent SKF B design high-speed bearings, these have a slightly higher speed capability and can accommodate heavier loads.
- Very high running accuracy
- Accommodate very high speeds
SKU: 320006
Bearing purchase
Good price and fast delivery!! Also a pleasure doing business with MROSupply.com!!
Read moreSKU: 2069041
Purchase of bearing
exactly what we needed and it showed up in only 1 day thank you so much.
Read moreSKU: 2067505
Skf 6205-2z/gjn
Item is exactly what I was looking for. Like always you get high quality with SKF
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
| Brand | Century |
| Model | ARB2024L3 |
| Brand | CoxReels |
| Model | 112-3-150-BVXX |
| Brand | SKF Bearing |
| Model | CMSS 300FG-01-01 |
| Brand | Consolidated Bearings |
| Model | NN-3015-KMS P/5 |
SKU: 320006
Bearing purchase
Good price and fast delivery!! Also a pleasure doing business with MROSupply.com!!
Read moreSKU: 2069041
Purchase of bearing
exactly what we needed and it showed up in only 1 day thank you so much.
Read moreSKU: 2067505
Skf 6205-2z/gjn
Item is exactly what I was looking for. Like always you get high quality with SKF
Read moreDisclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF