We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Nachi Bearing 7016CYDUP4 BNLS 80mm Inner Diameter x 125mm Outer Diameter x 22mm Width Precision Angular Contact Ball Bearing
MODEL 7016CYDUP4
Contact supplier for technical support on: 800-829-5787
$1,162.21 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Bore Type
Cylindrical
Cage Material
PA66 Polyamide Resin
Contact Angle (Deg)
15°
Dynamic Load Capacity (N)
96800
Grease Fill
No Fill
Inner Diameter (mm)
80
Inner Ring Material
JIS SUJ2 Steel
Internal Clearance
N/A
ISO Precision Class
P4
Limiting Speed - Grease (RPM)
7200
Limiting Speed - Oil (RPM)
9800
Max Operating Temp.
120°C (248°F)
Outer Diameter (mm)
125
Outer Ring Material
JIS SUJ2 Steel
Preload
Medium
Rolling Element Material
JIS SUJ2 Steel
Seals or Shields
No
Snap Ring
N/A
Static Load Capacity (N)
110000
Universally (Flush) Ground
Yes
Width (mm)
9800
Precision Angular Contact Ball Bearing. Balls and the inner ring and outer ring raceways are designed for contact in a specific contact angle, which means this type of bearing is suitable for composite loads (axial load and radial load). The contact angle means that axial force components are generated when a radial load is applied, so these are normally used in pairs at either end of a shaft. A contact angle of 15° is best for high speed, while a contact angle of 25° is better for axial loads. The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. Single row angular contact ball bearings can sustain radial, axial or composite loads, however any axial load must be in one direction. Larger contact angle type has better axial load capability. Small contact angle type has higher permissible speed capability. This bearing type is generally used in adjacent positions.
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
| Brand | Superlok |
| Model | SPUV-M2N |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-409141 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-452570 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-W69149 |
| Brand | MasterDrive |
| Model | L225-2-3/8 |