We never sell your data to third parties
INA AXW15 Thrust needle cage assembly
MODEL AXW15
Returnable:No
O.D.
0.591
Specifications
| D c1 | 15 mm | |
|---|---|---|
| D | 31 mm | |
| B | 3,2 mm |
| B 1 | 3,5 mm | |
|---|---|---|
| D 1 | 21 mm | |
| E a | 27 mm | |
| E b | 17 mm |
| m | 10 g | Mass |
|---|---|---|
| C a | 11300 N | Basic dynamic load rating, axial |
| C 0a | 36000 N | Basic static load rating, axial |
| C ua | 3600 N | Fatigue limit load |
| n G | 13200 1/min | Limiting speed |
| n B | 5800 1/min | Reference speed |
| AS1528 | Allocated axial bearing washer | |
| Suitable for combination with various drawn cup needle roller bearings and needle roller bearings, see under "Accessories". | ||
| HK1512 HK1516 HK1522-ZW | ||
| HK1514-RS | ||
| BK1512 BK1516 |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Formsprag |
| Model | CL40852-118 |
