We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
$199.90 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
O.D.
1.85
Specifications
| F w | 35 mm | |
|---|---|---|
| D | 47 mm | |
| C | 30 mm | Tolerance: -0,25 |
| C 1 | 12 mm | Tolerance: -0,2 |
|---|---|---|
| C 2 | 9 mm | |
| D 1 max | 52,1 mm | |
| d a | 47,7 mm | |
| d w | 35 mm | Tolerance: E8 |
| r a max | 0,6 mm | |
| r min | 0,6 mm |
| NAXR35 | Designation to DIN 5429 | |
| m | 157 g | Mass |
| C r | 27500 N | Basic dynamic load rating, radial |
| C 0r | 41500 N | Basic static load rating, radial |
| C a | 39000 N | Basic dynamic load rating, axial |
| C 0a | 101000 N | Basic static load rating, axial |
| C ur | 7300 N | Fatigue limit load, radial |
| C ua | 9500 N | Fatigue limit load, axial |
| n G | 6500 1/min | Limiting speed |
| n B | 2500 1/min | Reference speed |
| IR30X35X20 | Suitable inner ring |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Hubbell Wiring |
| Model | RFR303PE005 |
| Brand | RAB Lighting |
| Model | CDLED6S-26W-50D927-Z |
| Brand | Cutler Hammer |
| Model | IQ110-S43-A1-CP1 |
| Brand | Hydraulic Technologies |
| Model | TWHCHD06-100 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-862010 |
| Brand | Bunting Bearings |
| Model | B932S000008-13 |