We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
FAG 53214 single direction thrust ball bearing with 60mm bore and 110mm OD. Designed for axial loads in one direction, this bearing offers reliable performance in vertical shaft applications. Manufactured by Schaeffler, it meets ISO precision standards.
MODEL 53214
$343.98 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Current
16A
I.D.
2.362
Limiting speed
4000 1/min n G
Mass
0, 903 kg m
Minimum load factor
0, 16 A
O.D.
4.331
Specifications
| d | 70 mm | |
| D | 105 mm | |
| T | 28, 8 mm |
| A | 38 mm | |
| D 1 | 72 mm | |
| D a max | 88 mm | |
| d 1 | 105 mm | |
| d a min | 91 mm | |
| R | 80 mm | |
| r a max | 1 mm | |
| r min | 1 mm |
| Mass | 0, 903 kg | m |
|---|---|---|
| Basic dynamic load rating, axial | 65500 N | C a |
| Basic static load rating, axial | 160000 N | C 0a |
| Minimum load factor | 0, 16 | A |
| Limiting speed | 4000 1/min | n G |
| Fatigue limit load, axial | 7000 N | C ua |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
#320431
Brand
SKF Bearing
Model
53214
#5033119
Brand
NSK Bearings
Model
53214
| Brand | Bestorq |
| Model | A29LG |
| Brand | MCR Safety |
| Model | P1D4034 |
