We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
FAG 618/800M deep groove ball bearing with 800mm bore and 980mm OD. Single row, open design with a machined brass cage (M suffix). Suitable for high-speed applications requiring low friction and high radial load capacity. Precision engineered by Schaeffler for industrial machinery.
MODEL 618/800M
$21,934.47 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Limiting speed
1040 1/min n G
Mass
136 kg m
Reference speed
630 1/min n B
Specifications
| d | 800 mm | |
| D | 980 mm | |
| B | 82 mm |
| D 1 | 921, 8 mm | |
| D a max | 962 mm | |
| d 1 | 860 mm | |
| d a min | 818 mm | |
| r a max | 4 mm | |
| r min | 5 mm |
| Mass | 136 kg | m |
|---|---|---|
| Basic dynamic load rating, radial | 550000 N | C r |
| Basic static load rating, radial | 1270000 N | C 0r |
| Limiting speed | 1040 1/min | n G |
| Reference speed | 630 1/min | n B |
| Fatigue limit load, radial | 23800 N | C ur |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
| Brand | Tingley |
| Model | J31207-M |
