We never sell your data to third parties
FAG 6314.2RSR deep groove ball bearing with 70mm bore and 150mm OD. Double sealed (2RSR) for contamination protection. Suitable for high-speed applications requiring low friction and maintenance-free operation. Precision German engineering from Schaeffler.
MODEL 6314.2RSR
$384.93 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
I.D.
2.756
Limiting speed
2800 1/min n G
Mass
2, 6 kg m
O.D.
5.906
Reference speed
- 1/min n B
Specifications
| d | 70 mm | |
| D | 150 mm | |
| B | 35 mm |
| D 2 | 130, 2 mm | |
| D a max | 138 mm | |
| d 1 | 94, 8 mm | |
| d a min | 82 mm | |
| r a max | 2, 1 mm | |
| r min | 2, 1 mm |
| Mass | 2, 6 kg | m |
|---|---|---|
| Basic dynamic load rating, radial | 115000 N | C r |
| Basic static load rating, radial | 69000 N | C 0r |
| Limiting speed | 2800 1/min | n G |
| Reference speed | - 1/min | n B |
| Fatigue limit load, radial | 4450 N | C ur |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
#319411
Brand
SKF Bearing
Model
6314-2RS1
#2890185
Brand
Rollway
Model
6314 2RS EMQ
#5034331
Brand
NSK Bearings
Model
6314DDU
| Brand | Hydraulic Technologies |
| Model | CPSRSS502PA602MD |
| Brand | MRO Supply |
| Model | NVN-2004-B |
