We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
FAG 7008B.2RS.TVP single row angular contact ball bearing with 40mm bore. Double sealed for contamination protection. Polyamide cage, ball guided. Suitable for high-speed applications requiring axial and radial load support.
MODEL 7008B.2RS.TVP
$127.02 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Bearing Material
52100 Steel
Bearing Type
Angular Contact Bearings
Bore Type
Straight
Cage
Ball Guided
Cage Material
Polyamide
Closure Type
Open
Contact Angle
40°
Fillet Radius
1 mm
I.D.
1 4/7 in
Max Rpm
5200 rpm
O.D.
68 mm
Overall Width
15 mm
Product Type
Angular Contact Bearings
Radial Dynamic Load Capacity
28000 N
Radial Static Load Capacity
20300 N
Row Type Fill Slot
Single-Row Non-Fill Slot
Seal Type
Contact Seal
Series
70
Snap Ring Included
Without Snap Ring
Specifications
| d | 40 mm |
| D | 68 mm |
| B | 15 mm |
| a | 30 mm | |
| D 2 | 59, 4 mm | |
| D 3 | 64, 9 mm | |
| D a max | 63, 4 mm | |
| D b max | 64, 8 mm | |
| d 2 | 48, 8 mm | |
| d a min | 44, 6 mm | |
| r 1 min | 0, 6 mm | |
| r a max | 1 mm | |
| r a1 max | 0, 6 mm | |
| r min | 1 mm | |
| Contact angle | 40 ° | α |
|---|
| Basic dynamic load rating, radial | 28000 N | C r |
|---|---|---|
| Basic static load rating, radial | 20300 N | C 0r |
| Limiting speed | 5300 1/min | n G |
| Reference speed | - 1/min | n B |
| Fatigue limit load, radial | 1370 N | C ur |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
| Brand | Boston Gear |
| Model | 842BF-11K-M8 |
