We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
FAG 16034 deep groove ball bearing with 170mm bore and 260mm OD. This open bearing is designed for high-speed applications and accommodates radial and axial loads. Manufactured by Schaeffler, it features precision-ground races for smooth operation. Ideal for electric motors, gearboxes, and industrial machinery.
MODEL 16034
$1,087.16 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Bore Type
Straight
Closure Type
Open
Fillet Radius
1.5 mm
Finish Coating
Uncoated
I.D.
6.693
Internal Clearance
C0
Max Rpm
3500 rpm
O.D.
10.236
Operating Temperature Range
Maximum of +200°C
Overall Width
28 mm
Precision Rating
Not Rated
Product Type
Radial & Deep Groove Ball Bearings
Radial Dynamic Load Capacity
131000 N
Radial Static Load Capacity
136000 N
Row Type Fill Slot
Single Row Non-Fill Slot
Seal Type
Open
Series
160
Snap Ring Included
Without Snap Ring
Standards Met
DIN 625-1
Specifications
| d | 170 mm | |
| D | 260 mm | |
| B | 28 mm |
| D 1 | 228, 6 mm | |
| D a max | 253 mm | |
| d 1 | 202, 3 mm | |
| d a min | 177 mm | |
| r a max | 1, 5 mm | |
| r min | 1, 5 mm |
| Mass | 5, 15 kg | m |
|---|---|---|
| Basic dynamic load rating, radial | 131000 N | C r |
| Basic static load rating, radial | 136000 N | C 0r |
| f 0 | 16, 4 | |
| Limiting speed | 3500 1/min | n G |
| Reference speed | 2850 1/min | n B |
| Fatigue limit load, radial | 5400 N | C ur |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
| Brand | MCR Safety |
| Model | 6016BS |
| Brand | MCR Safety |
| Model | 9370L |
