We never sell your data to third parties
FAG HYD.NUT95 hydraulic nut is a precision tool designed for mounting and dismounting bearings with interference fits. It uses hydraulic pressure to expand the bearing inner ring, enabling safe and efficient installation or removal. Suitable for various bearing types and shaft sizes.
MODEL HYD.NUT95
$1,160.36 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Piston surface
52, 0 cm²
Stroke length
5 mm
Thread
M95X2 d 2G
Specifications
| Thread | M95X2 | d 2G |
|---|---|---|
| D m | 165 mm | |
| b 1 | 40 mm |
| Stroke length | 5 mm | |
|---|---|---|
| D K | 136 mm | |
| d K | 96 mm | |
| g | 3 mm |
| Mass, hydraulic nut | 4, 3 kg | m |
|---|---|---|
| Piston surface | 52, 0 cm² | |
| Press-on force at 800 bar | 416 kN |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Champion |
| Model | XL5-R |