We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Smith Bearing BCR-1-1/8-XBC (BCR-11/8-XBC) Non-Metallic Bushing Cam Follower with 1.125" roller OD, 7/16-20 UNF thread, and hex socket drive. This sealed, crowned stud-type cam follower features a non-metallic bushing designed for maintenance-free operation from -40°F to 200°F. Roller width is 0.625" with stud length of 1.000".
MODEL BCR-1-1/8-XBC
Contact supplier for technical support on: 800-932-0076
$25.67 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Eff. Thread Min.
1/2
Lube Fitting Size
3/16
Min. Boss Dia.
5/8
Oil Hole Dia.
3/32
Oil Hole Location
1/4
Recom. Bore
.4375
Recom. Bore Tolerance
+.0005/-.0005
Roller O.D.
1.125
Roller O.D. Tolerance
+.000/-.001
Roller Width
.625
Roller Width Tolerance
+.000/-.005
SMITH Bearing Number
BCR-11/8-XBC
Stud Dia.
.4375
Stud Dia. Tolerance
+.001/-.000
Stud Length
1
Stud Length Tolerance
+.005/-.0005
Thread U.N.F. Class 2A
7/16-20
Cam Followers Smith Bearings presents the BCR-1-1/8-XBC Non-Metallic Bushing Stud Crowned, a high-performance cam follower designed for precision applications in both aerospace and industrial settings. With over 50 years of expertise in the bearing industry, Smith Bearings ensures that this product meets the highest standards of quality and reliability.
Key Features
| Precision Design | Engineered for optimal performance with a crowned profile that ensures smooth operation and reduced wear on contacting surfaces. |
|---|---|
| Non-Metallic Construction | Composed of advanced engineered plastic materials, this cam follower is perfect for applications where corrosion resistance is crucial. |
| Size Specification | Specifically designed to fit a 1-1/8 inch stud diameter, ensuring compatibility with various systems. |
| Self-Lubricating Bushing | Incorporates a self-lubricating feature that minimizes maintenance requirements and enhances longevity. |
| Load Capacity | Capable of handling significant load applications, making it suitable for demanding environments. |
Applications
| Aerospace Industry | Ideal for use in aircraft engines and airframe assemblies, where precision and reliability are paramount. |
|---|---|
| Industrial Equipment | Perfect for various machinery applications where reduced friction and wear are essential. |
| Corrosive Environments | Designed for durability in challenging conditions, including exposure to chemicals and moisture. |
Benefits
| Enhanced Performance | The crowned design minimizes friction, allowing for smoother operation and increased efficiency. |
|---|---|
| Durability | The non-metallic materials resist corrosion, ensuring a longer service life even in harsh environments. |
| Reduced Maintenance | The self-lubricating feature decreases the need for frequent maintenance, saving time and operational costs. --- Product information compiled with AI assistance for reference purposes. |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
Disclaimer: The return policy information shown below is merely a copy of the text as stated in IDC-USA's Annual Return Policy.
File: http://documents.mrosupply.com/file_uploads/IDCreturnpolicy.pdf
ANNUAL RETURN POLICY PURPOSE: The purpose of IDC-USA’s Annual Return Policy is to allow IDC Distributors the opportunity to return salable stock merchandise of current design that may not have adequate “turns” and replace it with faster moving product.
ACCEPTANCE: IDC Owner-Distributors shall submit a return list to IDC-USA with all pertinent information as follows:
a. Product brand name
b. Quantity
c. IDC-USA’s product identification number
d. Corresponding distributor’s P.O. number or invoice number Acceptance of return shall be subject to IDC-USA inventory levels and manufacturer’s restrictions.
AUTHORIZATION: The return shall be audited and the IDC Owner-Distributor will receive an approved return list with a Return Material Authorization (RMA) number assigned to it. RETURN DATE: Each owner-distributor shall be assigned a month during which they shall be entitled to make a single annual return.
Product Qualification: All products returned must be:
a. On the current price list
b. In good resale condition
c. In the original packaging
d. Purchased from IDC-USA within 3 years of the return
e. Stock items only; no special order items
f. Only those items which have been approved
VALUE: The IDC Owner-Distributor shall receive a credit not to exceed 5% of the owner-distributor’s prior year annual purchases from the IDC Distribution Center. Credit received shall be the actual purchase price or price in effect at the time of the return, whichever is lowest, less applicable restocking charges. Additionally, all annual returns must have a minimum return value of $100.
RESTOCKING CHARGES: There will be a 15% restocking fee unless return is offset by a noncancelable order of equal value to be placed at the time of return. All items received that are not in their original box shall be subject to an additional 15% repackaging fee.
FREIGHT: Returns will be made freight prepaid by the IDC Owner-Distributor to the IDC Distribution Center. The packing slip and all cartons must reference the RMA number. The owner-distributor will be notified of any items received that do not qualify as set forth above. Those items will not be credited and shall be scrapped unless the IDC Owner-Distributor directs otherwise and assumes any additional transportation charges.