We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Smith Bearing BCR-1-1/8-XC is a non-metallic bushing stud-type cam follower with a 1.125" roller OD and 7/16-20 UNF thread. It features a crowned outer ring and is sealed for contaminant resistance. The bushing design allows operation without lubrication from -40°F to 200°F. Roller width is 0.625" and stud length is 1.000".
MODEL BCR-1-1/8-XC
Contact supplier for technical support on: 800-932-0076
$25.01 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Eff. Thread Min.
1/2
Lube Fitting Size
3/16
Min. Boss Dia.
5/8
Oil Hole Dia.
3/32
Oil Hole Location
1/4
Recom. Bore
.4375
Recom. Bore Tolerance
+.0005/-.0005
Roller O.D.
1.125
Roller O.D. Tolerance
+.000/-.001
Roller Width
.625
Roller Width Tolerance
+.000/-.005
SMITH Bearing Number
BCR-1-1/8-XC
Stud Dia.
.4375
Stud Dia. Tolerance
+.001/-.000
Stud Length
1
Stud Length Tolerance
+.005/-.0005
Thread U.N.F. Class 2A
7/16-20
# Cam Followers The **BCR-1-1/8-XC Non-Metallic Bushing Stud Crowned** from Smith Bearings is a precision-engineered cam follower designed to deliver exceptional performance in demanding applications. Built with advanced materials and innovative design features, this cam follower is ideal for both aerospace and industrial environments. ## Key Features • **Material Composition**: Constructed from high-performance non-metallic materials, ensuring resistance to wear and corrosion while minimizing weight. • **Crowned Design**: Features a crowned stud configuration that enhances load distribution and facilitates smooth operation across various surfaces. • **Dimensions**: With a size of 1-1/8 inch, the BCR-1-1/8-XC is designed to fit seamlessly into existing systems, maximizing compatibility and functionality. • **Self-Lubricating Capability**: Engineered with self-lubricating properties, reducing maintenance needs and extending service life in friction-prone applications. • **Quality Assurance**: Manufactured under ISO 9001 and AS 9100 certifications, ensuring compliance with stringent industry standards for reliability and performance. ## Applications • **Aerospace Industry**: Specifically approved for use in aerospace applications, including engines and airframes, where precision and reliability are critical. • **Industrial Machinery**: Suitable for various industrial machinery requiring durable and efficient cam follower solutions in both low and high-thrust load environments. • **Corrosive Environments**: The non-metallic construction makes it ideal for operations in corrosive settings, maintaining performance integrity under challenging conditions. ## Benefits • **Enhanced Durability**: The non-metallic build provides superior resistance to wear and environmental factors, ensuring longevity and reduced operational costs. • **Reduced Maintenance**: The self-lubricating feature minimizes the need for frequent lubrication, allowing for lower maintenance requirements and increased uptime. • **Versatile Application**: Its crowned design and precise dimensions make it adaptable to a range of applications, providing flexibility for engineers and manufacturers. --- *Product information compiled with AI assistance for reference purposes.*
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
Disclaimer: The return policy information shown below is merely a copy of the text as stated in IDC-USA's Annual Return Policy.
File: http://documents.mrosupply.com/file_uploads/IDCreturnpolicy.pdf
ANNUAL RETURN POLICY PURPOSE: The purpose of IDC-USA’s Annual Return Policy is to allow IDC Distributors the opportunity to return salable stock merchandise of current design that may not have adequate “turns” and replace it with faster moving product.
ACCEPTANCE: IDC Owner-Distributors shall submit a return list to IDC-USA with all pertinent information as follows:
a. Product brand name
b. Quantity
c. IDC-USA’s product identification number
d. Corresponding distributor’s P.O. number or invoice number Acceptance of return shall be subject to IDC-USA inventory levels and manufacturer’s restrictions.
AUTHORIZATION: The return shall be audited and the IDC Owner-Distributor will receive an approved return list with a Return Material Authorization (RMA) number assigned to it. RETURN DATE: Each owner-distributor shall be assigned a month during which they shall be entitled to make a single annual return.
Product Qualification: All products returned must be:
a. On the current price list
b. In good resale condition
c. In the original packaging
d. Purchased from IDC-USA within 3 years of the return
e. Stock items only; no special order items
f. Only those items which have been approved
VALUE: The IDC Owner-Distributor shall receive a credit not to exceed 5% of the owner-distributor’s prior year annual purchases from the IDC Distribution Center. Credit received shall be the actual purchase price or price in effect at the time of the return, whichever is lowest, less applicable restocking charges. Additionally, all annual returns must have a minimum return value of $100.
RESTOCKING CHARGES: There will be a 15% restocking fee unless return is offset by a noncancelable order of equal value to be placed at the time of return. All items received that are not in their original box shall be subject to an additional 15% repackaging fee.
FREIGHT: Returns will be made freight prepaid by the IDC Owner-Distributor to the IDC Distribution Center. The packing slip and all cartons must reference the RMA number. The owner-distributor will be notified of any items received that do not qualify as set forth above. Those items will not be credited and shall be scrapped unless the IDC Owner-Distributor directs otherwise and assumes any additional transportation charges.