We never sell your data to third parties
Smith Bearing BCR-1-3/4-C is a non-metallic bushing stud-type cam follower with a crowned roller. It features a 1.750" roller OD, 3/4-16 UNF thread, and 1" roller width. The bushing design operates without lubrication from -40°F to 200°F (250°F short duration). This crowned profile reduces edge loading in misaligned applications.
MODEL BCR-1-3/4-C
Contact supplier for technical support on: 800-932-0076
$42.75 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Eff. Thread Min.
7/8
Lube Fitting Size
3/16
Min. Boss Dia.
1-3/64
Oil Hole Dia.
3/32
Oil Hole Location
7/16
Recom. Bore
.750
Recom. Bore Tolerance
+.0005/-.0005
Roller O.D.
1.750
Roller O.D. Tolerance
+.000/-.001
Roller Width
1.000
Roller Width Tolerance
+.000/-.005
SMITH Bearing Number
BCR-1-3/4-C
Stud Dia.
.750
Stud Dia. Tolerance
+.001/-.000
Stud Length
1-3/4
Stud Length Tolerance
+.005/-.0005
Thread U.N.F. Class 2A
3/4-16
Cam Followers Introducing the **BCR-1-3/4-C Non-Metallic Bushing Stud Crowned** by **Smith Bearings**, a premier choice in precision needle roller bearings designed for both aerospace and industrial applications. With over 50 years of expertise, Smith Bearings is renowned for its commitment to quality, reliability, and innovative solutions tailored to meet the specific needs of various operational environments. ## Key Features • **Material Composition**: Constructed from high-performance non-metallic materials, ensuring resistance to wear and corrosion in demanding environments. • **Crowned Design**: The crowned profile assists in accommodating misalignment, enhancing performance and extending service life. • **Size Specification**: Engineered with a diameter of 1-3/4 inches, making it suitable for a wide range of applications. • **Self-Lubricating**: Designed with engineered plastic bushings that provide self-lubrication, reducing maintenance needs and increasing operational efficiency. • **Load Capacity**: Capable of handling significant thrust loads, ideal for high-stress applications. ## Applications • **Aerospace Industry**: Perfectly suited for use in aircraft engines and airframes, complying with stringent aerospace standards. • **Industrial Equipment**: Ideal for conveyor systems, robotics, and machinery requiring reliable motion control and reduced friction. • **Corrosive Environments**: Non-metallic construction makes it a reliable choice for applications exposed to corrosive substances, ensuring longevity and performance. ## Benefits • **Enhanced Performance**: The self-lubricating feature minimizes friction, leading to smoother operation and reduced wear on components. • **Reduced Downtime**: Durable and reliable design lowers the likelihood of mechanical failure, promoting greater uptime and operational efficiency. • **Versatile Use**: The crowned design allows for flexibility in alignment, making it suitable for various installations and applications. --- *Product information compiled with AI assistance for reference purposes.*
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Smith Bearings |
| Model | MYR-20-C |
| Brand | Smith Bearings |
| Model | BCR-1-3/4-XBC |
Disclaimer: The return policy information shown below is merely a copy of the text as stated in IDC-USA's Annual Return Policy.
File: http://documents.mrosupply.com/file_uploads/IDCreturnpolicy.pdf
ANNUAL RETURN POLICY PURPOSE: The purpose of IDC-USA’s Annual Return Policy is to allow IDC Distributors the opportunity to return salable stock merchandise of current design that may not have adequate “turns” and replace it with faster moving product.
ACCEPTANCE: IDC Owner-Distributors shall submit a return list to IDC-USA with all pertinent information as follows:
a. Product brand name
b. Quantity
c. IDC-USA’s product identification number
d. Corresponding distributor’s P.O. number or invoice number Acceptance of return shall be subject to IDC-USA inventory levels and manufacturer’s restrictions.
AUTHORIZATION: The return shall be audited and the IDC Owner-Distributor will receive an approved return list with a Return Material Authorization (RMA) number assigned to it. RETURN DATE: Each owner-distributor shall be assigned a month during which they shall be entitled to make a single annual return.
Product Qualification: All products returned must be:
a. On the current price list
b. In good resale condition
c. In the original packaging
d. Purchased from IDC-USA within 3 years of the return
e. Stock items only; no special order items
f. Only those items which have been approved
VALUE: The IDC Owner-Distributor shall receive a credit not to exceed 5% of the owner-distributor’s prior year annual purchases from the IDC Distribution Center. Credit received shall be the actual purchase price or price in effect at the time of the return, whichever is lowest, less applicable restocking charges. Additionally, all annual returns must have a minimum return value of $100.
RESTOCKING CHARGES: There will be a 15% restocking fee unless return is offset by a noncancelable order of equal value to be placed at the time of return. All items received that are not in their original box shall be subject to an additional 15% repackaging fee.
FREIGHT: Returns will be made freight prepaid by the IDC Owner-Distributor to the IDC Distribution Center. The packing slip and all cartons must reference the RMA number. The owner-distributor will be notified of any items received that do not qualify as set forth above. Those items will not be credited and shall be scrapped unless the IDC Owner-Distributor directs otherwise and assumes any additional transportation charges.