We never sell your data to third parties
Smith Bearing BCR-1-3/4-XBC Non-Metallic Bushing Cam Follower with 1.750" roller OD, 3/4-16 UNF thread, and hex socket drive. This crowned, sealed stud-type cam follower features a non-metallic bushing for maintenance-free operation at temperatures from -40°F to 200°F. Roller width is 1.000" and stud length is 1-3/4".
MODEL BCR-1-3/4-XBC
Contact supplier for technical support on: 800-932-0076
$44.72 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Eff. Thread Min.
7/8
Lube Fitting Size
3/16
Min. Boss Dia.
1-3/64
Oil Hole Dia.
3/32
Oil Hole Location
7/16
Recom. Bore
.750
Recom. Bore Tolerance
+.0005/-.0005
Roller O.D.
1.750
Roller O.D. Tolerance
+.000/-.001
Roller Width
1.000
Roller Width Tolerance
+.000/-.005
SMITH Bearing Number
BCR-13/4-XBC
Stud Dia.
.750
Stud Dia. Tolerance
+.001/-.000
Stud Length
1-3/4
Stud Length Tolerance
+.005/-.0005
Thread U.N.F. Class 2A
3/4-16
Cam Followers The BCR-1-3/4-XBC Non-Metallic Bushing Stud Crowned is a premier cam follower designed to provide reliable and efficient operation in various automotive and industrial applications. Manufactured by Smith Bearings, a trusted name in precision needle roller bearings, this cam follower showcases innovative design elements that enhance performance and durability.
Key Features
| Non-Metallic Construction | The bushing is made from high-performance engineered plastic, ensuring excellent wear resistance and reduced friction, ideal for applications in corrosive environments. |
|---|---|
| Crowned Design | The crowned profile of the stud provides optimal contact with tracks and surfaces, allowing for smooth and consistent rolling motion. |
| Precision Engineering | Manufactured to exacting tolerances, the BCR-1-3/4-XBC ensures reliable performance under varying load conditions, contributing to longevity and reduced maintenance needs. |
| Versatile Sizing | Designed to fit both inch and metric applications, this cam follower is adaptable to a wide range of systems. |
| Self-Lubricating | The engineered material incorporates self-lubricating properties, minimizing the need for additional lubrication and enhancing operational efficiency. |
Applications
| Automotive Industry | Perfect for use in various automotive components where reliability and performance are critical, particularly in engines and transmission systems. |
|---|---|
| Industrial Machinery | Ideal for conveyor systems and automated machinery that require precision motion control and minimal maintenance. |
| Aerospace Applications | Approved for use in aerospace and military applications, ensuring safety and performance in demanding environments. |
Benefits
| Enhanced Durability | The non-metallic construction offers superior resistance to wear and corrosion, extending the lifespan of the cam follower in challenging conditions. |
|---|---|
| Reduced Friction | The self-lubricating features and crowned design lower friction, leading to improved energy efficiency and reduced operational costs. |
| Versatile Compatibility | The ability to meet both inch and metric specifications makes it suitable for a variety of applications, simplifying inventory management and procurement. --- Product information compiled with AI assistance for reference purposes. |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Smith Bearings |
| Model | YR-1-5/8-C |
| Brand | Timken Belts |
| Model | D270L050 |
| Brand | Smith Bearings |
| Model | MCR-13-S |
Disclaimer: The return policy information shown below is merely a copy of the text as stated in IDC-USA's Annual Return Policy.
File: http://documents.mrosupply.com/file_uploads/IDCreturnpolicy.pdf
ANNUAL RETURN POLICY PURPOSE: The purpose of IDC-USA’s Annual Return Policy is to allow IDC Distributors the opportunity to return salable stock merchandise of current design that may not have adequate “turns” and replace it with faster moving product.
ACCEPTANCE: IDC Owner-Distributors shall submit a return list to IDC-USA with all pertinent information as follows:
a. Product brand name
b. Quantity
c. IDC-USA’s product identification number
d. Corresponding distributor’s P.O. number or invoice number Acceptance of return shall be subject to IDC-USA inventory levels and manufacturer’s restrictions.
AUTHORIZATION: The return shall be audited and the IDC Owner-Distributor will receive an approved return list with a Return Material Authorization (RMA) number assigned to it. RETURN DATE: Each owner-distributor shall be assigned a month during which they shall be entitled to make a single annual return.
Product Qualification: All products returned must be:
a. On the current price list
b. In good resale condition
c. In the original packaging
d. Purchased from IDC-USA within 3 years of the return
e. Stock items only; no special order items
f. Only those items which have been approved
VALUE: The IDC Owner-Distributor shall receive a credit not to exceed 5% of the owner-distributor’s prior year annual purchases from the IDC Distribution Center. Credit received shall be the actual purchase price or price in effect at the time of the return, whichever is lowest, less applicable restocking charges. Additionally, all annual returns must have a minimum return value of $100.
RESTOCKING CHARGES: There will be a 15% restocking fee unless return is offset by a noncancelable order of equal value to be placed at the time of return. All items received that are not in their original box shall be subject to an additional 15% repackaging fee.
FREIGHT: Returns will be made freight prepaid by the IDC Owner-Distributor to the IDC Distribution Center. The packing slip and all cartons must reference the RMA number. The owner-distributor will be notified of any items received that do not qualify as set forth above. Those items will not be credited and shall be scrapped unless the IDC Owner-Distributor directs otherwise and assumes any additional transportation charges.