We never sell your data to third parties
Smith Bearing BCR-1-BC non-metallic bushing stud cam follower with 1.000" roller OD, 7/16-20 UNF thread, and hex head drive. Features a crowned outer ring and is designed for unlubricated operation from -40°F to 200°F. Roller width is 0.625" with a stud length of 1.000". Suitable for applications requiring low friction and corrosion resistance.
MODEL BCR-1-BC
Contact supplier for technical support on: 800-932-0076
$24.47 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Eff. Thread Min.
1/2
Lube Fitting Size
3/16
Min. Boss Dia.
5/8
Oil Hole Dia.
3/32
Oil Hole Location
1/4
Recom. Bore
.4375
Recom. Bore Tolerance
+.0005/-.0005
Roller O.D.
1.000
Roller O.D. Tolerance
+.000/-.001
Roller Width
.625
Roller Width Tolerance
+.000/-.005
SMITH Bearing Number
BCR-1-BC
Stud Dia.
.4375
Stud Dia. Tolerance
+.001/-.000
Stud Length
1
Stud Length Tolerance
+.005/-.0005
Thread U.N.F. Class 2A
7/16-20
Cam Followers The BCR-1-BC Non-Metallic Bushing Stud Crowned is an advanced cam follower designed by Smith Bearings, a leader in precision needle roller bearings. With over 50 years of experience in the industry, Smith Bearings combines technical expertise and innovative design to provide reliable and efficient solutions for various applications in both aerospace and industrial markets.
Key Features
| Non-Metallic Bushing | Constructed with high-performance engineered plastic that offers excellent corrosion resistance and reduced friction. |
|---|---|
| Crowned Design | The crowned profile allows for better load distribution and enhances the follower's performance in dynamic applications. |
| Precision Manufacturing | Each unit is produced under strict quality controls to meet ISO 9001 and AS 9100 standards, ensuring superior reliability. |
| Versatile Compatibility | Designed to fit a wide range of applications, from industrial machinery to aerospace components. |
| Durability | Engineered for long-lasting performance even in challenging environments, minimizing maintenance requirements. |
Applications
| Industrial Machinery | Ideal for guiding and supporting moving parts in various machinery applications, reducing wear and tear. |
|---|---|
| Aerospace Components | Approved for use in critical aerospace applications, ensuring the highest standards of safety and performance. |
| Robust Environments | Suitable for both standard and corrosive environments, thanks to its non-metallic construction. |
Benefits
| Increased Efficiency | The non-metallic design reduces friction, leading to smoother operation and lower energy consumption. |
|---|---|
| Extended Service Life | High durability and resistance to wear result in fewer replacements and reduced operational costs. |
| Enhanced Performance | The crowned design improves load distribution, enabling better handling of dynamic loads and reducing the risk of failure. --- Product information compiled with AI assistance for reference purposes. |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
Disclaimer: The return policy information shown below is merely a copy of the text as stated in IDC-USA's Annual Return Policy.
File: http://documents.mrosupply.com/file_uploads/IDCreturnpolicy.pdf
ANNUAL RETURN POLICY PURPOSE: The purpose of IDC-USA’s Annual Return Policy is to allow IDC Distributors the opportunity to return salable stock merchandise of current design that may not have adequate “turns” and replace it with faster moving product.
ACCEPTANCE: IDC Owner-Distributors shall submit a return list to IDC-USA with all pertinent information as follows:
a. Product brand name
b. Quantity
c. IDC-USA’s product identification number
d. Corresponding distributor’s P.O. number or invoice number Acceptance of return shall be subject to IDC-USA inventory levels and manufacturer’s restrictions.
AUTHORIZATION: The return shall be audited and the IDC Owner-Distributor will receive an approved return list with a Return Material Authorization (RMA) number assigned to it. RETURN DATE: Each owner-distributor shall be assigned a month during which they shall be entitled to make a single annual return.
Product Qualification: All products returned must be:
a. On the current price list
b. In good resale condition
c. In the original packaging
d. Purchased from IDC-USA within 3 years of the return
e. Stock items only; no special order items
f. Only those items which have been approved
VALUE: The IDC Owner-Distributor shall receive a credit not to exceed 5% of the owner-distributor’s prior year annual purchases from the IDC Distribution Center. Credit received shall be the actual purchase price or price in effect at the time of the return, whichever is lowest, less applicable restocking charges. Additionally, all annual returns must have a minimum return value of $100.
RESTOCKING CHARGES: There will be a 15% restocking fee unless return is offset by a noncancelable order of equal value to be placed at the time of return. All items received that are not in their original box shall be subject to an additional 15% repackaging fee.
FREIGHT: Returns will be made freight prepaid by the IDC Owner-Distributor to the IDC Distribution Center. The packing slip and all cartons must reference the RMA number. The owner-distributor will be notified of any items received that do not qualify as set forth above. Those items will not be credited and shall be scrapped unless the IDC Owner-Distributor directs otherwise and assumes any additional transportation charges.