We never sell your data to third parties
McGill MCF 90 SX CAMROL metric standard stud cam follower with 90 mm cylindrical roller diameter, LUBRI-DISC seal, and screwdriver slot drive. Constructed from 52100 bearing steel with black oxide finish. Designed for cam mechanisms, packaging machinery, and conveyors.
MODEL MCF 90 SX
Contact supplier for technical support on: 800-626-2120
$491.06 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Ability to Relubricate
Yes
Adjustment
None
Clamping Torque (Nm)
441
Dynamic Track Roller Load Rating (N)
64140
Hex/Slot
Screwdriver Slot
Industry Standard
DIN / JIS
Limiting Speed
1500
Material
Bearing Steel, Black Oxide Finish
Minimum Thread Length (in)
32
O.D. Configuration
Cylindrical
Oil Hole Center (mm)
15
Oil Hole Diameter (mm)
4
Platform
CAMROL
Reamed Hole (mm)
8
Roller Diameter (mm)
90
Rolling Element
Needle Roller - Full Complement
Series
Metric CAMROL
Static Load Rating
102300
Stud Diameter (mm)
30
Threads
M30x1.5
Tolerance Class
P0 Equivalent
Width
3.6
Regal Beloit Mcgill&Reg; MCF 90 SX
UPC: 726166028763 | UNSPSC: 26101708 | GTIN:
Bearings > Cam Follower & Yoke Rollers > Crowned/Flat Follower & Track Runners
McGill® CAMROL® Cam Follower, Cylindrical OD, Series: MCF, 90 mm Roller Diameter, 35 mm Roller Width, 30 mm Stud Diameter, 63 mm Stud Length, M30 x 1.5 Thread, 32 mm Thread Length, 64140 N Dynamic/102300 N Static Load, 1500 rpm Maximum, -20 to 250 deg F, Standard Stud, Sealed Closure, Slotted Head, Chrome Steel Roller, 8620H Steel Stud, Black Oxide
Features:
- Full complement needle roller construction provides high radial load capacity, it also provides improved resistance to shock loading versus caged needle bearing
- It provides improved resistance to shock loading versus caged needle bearing
- A heavy sectioned outer race design to help withstand shock loading of cam follower operation
- Inner studs are induction heat treated in the roller path and flange surfaces
- Our sealed bearing option helps extend bearing life by utilizing a lubrication groove and LUBRI-DISC® seals
- Bearings are supplied pre-lubricated with lithium soap thickened grease
- The annular groove in the outer raceway provides a lubrication reservoir which increases the pre-lubricated life of the bearing
- The threads are manufactured to a class 2 tolerance
Specs:
- Stud Material: 8620H Steel
- Stud Type: Standard
- Stud Diameter: 30 mm
- Stud Length: 63 mm
- Roller Material: Chrome Steel
- Roller Width: 35 mm
- Roller Diameter: 90 mm
- Thread Length: 32 mm
- Head Type: Slotted
- Temperature Rating: -20 to 250 deg F
- Load Capacity: 64140 N Dynamic/102300 N Static
- Closure Type: Sealed
- Thread Size: M30 x 1.5
- Finish: Black Oxide
- Maximum Speed: 1500 rpm
- Type: Cylindrical OD
- Series: MCF
Packaging:
Certifications/Standards:
ABMA Standard
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | SMC |
| Model | JSXD31-CE03N-5WN-D |