We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Rollway NJ 312 EM C3 60 mm Bore Size, 130 mm Outside Diameter, Radial Cylindrical Roller Bearing, Caged Roller, Straight Bore, Unsealed, High Chromium Bearing Steel, C3 Radial Clearance 60 mm Bore Size, 130 mm Outside Diameter, Radial Cylindrical Roller Bearing, Caged Roller, Straight Bore, Unsealed, High Chromium Bearing Steel, C3 Radial Clearance
MODEL NJ 312 EM C3
Contact supplier for technical support on: 800-626-2120
$541.52 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Bore Size (mm)
60
Bore Type
Straight
Cage Material
Brass
Duplexing
No
Dynamic Load Rating (lb)
33272
Full Complement/Caged
Caged
Height
1.5
Inner Race Configuration
Separable Both Directions
Length
5.2
Material
High Chromium Bearing Steel
Misalignment
No
Number of Rows
1
O.D. (mm)
130
Outer Race Configuration
Non-Separable
Overall Width (mm)
31
Platform
Cylindrical Radial
Profile
Complete with Outer and Inner Race
Radial Clearance
C3
Retainer
Yes
Rolling Element
Cylindrical Roller
Seal Type
Unsealed
Sealed
None
Snap Ring
No
Speed [Max] Grease (RPM)
4500
Speed [Max] Oil (RPM)
5300
Static Load Rating (kN)
155
Static Load Rating (lb)
34845
Version
EM: Extra capacity design; Machined brass retainer
Width
5.3
| Rows of rollers | Single row |
|---|---|
| Retainer | Machined Brass |
| Inner Race Configuration | Separable Both Directions |
| Outer Race Configuration | Non-Separable |
| Version | EM: Extra capacity design; Machined brass retainer |
| Additional Information | Can be used to a certain extent to take combined loads |
| Sale Qty Multiple: | 1 |
|---|---|
| Packaged Length: | 5.12 |
| Packaged Width: | 5.12 |
| Packaged Height: | 1.38 |
| No. Links/Ft. : | 0 |
| Rows of rollers: | Single row |
| Retainer: | Machined Brass |
| Inner Race Configuration: | Separable Both Directions |
| Outer Race Configuration: | Non-Separable |
| Version: | EM: Extra capacity design; Machined brass retainer |
| Additional Information: | Can be used to a certain extent to take combined loads |
Dimensions
| Part No | NJ 312 EM C3 |
|---|---|
| Description | NJ 312 EM C3 |
| d | 60mm (2.3622 inch) |
| D | 130mm (5.1181 inch) |
| B | 31mm (1.2205 inch) |
| Basic Dynamic Rating Cr | 148kN (33, 272 pounds) |
| Basic Static Rating Cor | 155kN (34, 845 pounds) |
| Limiting Speed Grease (RPM) | 4, 500 |
| Limiting Speed Oil (RPM) | 5, 300 |
| F | 77mm (3.0315 inch) |
| rs min | 2.1mm (0.0827 inch) |
| r1s min | 2.1mm (0.0827 inch) |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Gates Rubber |
| Model | 3236HV821 |
| Brand | INTRALOX |
| Model | C3J7 XXXXXXXX |
| Brand | Winsmith |
| Model | 924MDNE32000DN |
