We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
NTN XLS7350BGCS44 is an extra light series single-row deep groove ball bearing with a straight bore. It features an open enclosure and a steel cage, constructed from high carbon chrome steel. This radial ball bearing is designed for applications requiring minimal radial cross-section.
MODEL XLS7350BGCS44
$279.87 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
B (in)
0.7500
Ball Material
Steel
Ball material
Steel
Bore Type
Round
Bore type
Round
Cage Material
Steel
Cage material
Steel
Cage Type
Pressed
Cage type
Pressed
Configuration
One
d (in)
3.5000
D (in)
4.9998
Enclosure
Open
I.D.
178 mm
Material
High carbon chrome steel
O.D.
241 mm
Operating Temperature Range
-40 to 250 °F
Operating temperature range
-40 to 250 ºF
Precision
Class 0
r (in)
0.0630
Radial Internal Clearance
CS44
Radial internal clearance
CS44
Type
Radial Ball Bearing
Width
32 mm
Technical Specifications
Type | Radial Ball Bearing |
|---|---|
Bore Type | Round |
Material | High Carbon Chrome Steel |
Cage Type | Pressed |
Cage Material | Steel |
Ball Material | Steel |
Precision | Class 0 |
Configuration | One |
Radial Internal Clearance | CS44 |
Enclosure | Open |
Operating Temperature Range | -40 to 250 F-40 to 120 C |
Dimensional Specifications
| |
d | 3.5000 in178.000 mm |
|---|---|
D | 4.9998 in241.000 mm |
B | 0.7500 in32.000 mm |
r | 0.0630 in2.000 mm |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
| Brand | MRO Supply |
| Model | D208555 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-878013 |
