We never sell your data to third parties
NTN WPS200GRC bearing insert with eccentric locking collar, wide inner ring, and spherical O.D. Features a 2 in outside diameter, double sealed enclosure, and through hardened steel construction. Designed for mounted bearing applications requiring secure shaft locking and misalignment accommodation.
MODEL WPS200GRC
$185.09 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
B (in)
2.1850
B1
2.8110 in
B5
0.8150 in
Ball Material
Steel
Ball material
Steel
Basic Outer Ring
211
Bearing Type
Ball Bearing
Bore Type
Round
Bore type
Round
C (in)
0.9843
Collar Number
C-200#BCA
Configuration
One
D (in)
3.9370
d (in)
2
d3
2.9480 in
DS
7/16-14 UNC
Dynamic Load Rating
9800 lbf
Dynamic load rating
9800 lbf
Enclosure
Double Sealed
G (in)
0.3110
I.D.
50.803 mm
Locking Device
Eccentric Locking Collar
Locking device
Eccentric locking collar
Locking Device Part Number
EL211-200
Lubrication
Relubricatable
Material
Through hardened steel
O.D.
100 mm
Operating Temperature Range
-40 to 250 °F
Operating temperature range
-40 to 250 ºF
r (in)
0.0591
Radial Internal Clearance
C3
Radial internal clearance
C3
S
1.0925 in
S1
1.7185 in
Seal Material
Nitrile Rubber
Seal material
Nitrile rubber
Seal Type
Contact
Seal type
Contact
Static Load Rating
6550 lbf
Static load rating
6550 lbf
Type
Insert Bearing
Width
71.4 mm
Technical Specifications
Type | Insert Bearing |
Bore Type | Round |
Bearing Type | Ball Bearing |
Material | Through Hardened Steel |
Ball Material | Steel |
Seal Type | Contact |
Seal Material | Nitrile Rubber |
Configuration | One |
Locking Device | Eccentric Locking Collar |
Locking Device Part Number | EL211-200 |
Lubrication | Relubricatable |
Collar Number | C-200#BCA |
Basic Outer Ring | 211 |
Radial Internal Clearance | C3 |
Static Load Rating | 6550 lbf29200 N29.20 kN |
Dynamic Load Rating | 9800 lbf43500 N43.50 kN |
Enclosure | Double Sealed |
Weight | 3.388 lb1.537 kg |
Operating Temperature Range | -40 to 250 F-40 to 120 C |
Dimensional Specifications
| |
d | 2 in50.800 mm |
D | 3.9370 in100.000 mm |
C | 0.9843 in25.000 mm |
B | 2.1850 in55.500 mm |
B1 | 2.8110 in71.400 mm |
r | 0.0591 in1.500 mm |
ds | 7/16-14 UNC |
G | 0.3110 in7.900 mm |
d3 | 2.9480 in74.880 mm |
B5 | 0.8150 in20.700 mm |
S1 | 1.7185 in43.650 mm |
S | 1.0925 in27.750 mm |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Hammond Power Solutions |
| Model | MG3A0045RKSAHC0 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-838311 |
| Brand | Edwards |
| Model | SD90/.5X4 |