We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
NTN NJ2316EG1C3 is a single-row cylindrical roller bearing with an 80 mm straight bore. The NJ design features a single flange on the outer ring, allowing axial location in one direction. It has a high-strength machined brass cage and C3 clearance. This open bearing is suitable for gearboxes, electric motors, and pumps.
MODEL NJ2316EG1C3
$925.71 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
B (in)
2.2835
Bore Type
Round
Bore type
Round
Cage Material
High Strength Machined Brass Rivetless w/ square holes
Cage material
High strength machined brass rivetless w/ square holes
Configuration
One
D (in)
6.6929
d (in)
3.1496
Da max
6.2598 in
da min
3.5827 in
Dynamic Load Rating
80000 lbf
Dynamic load rating
80000 lbf
Enclosure
Open
Fw
3.9764 in
I.D.
80 mm
J (in)
4.3701
Limiting Speed - Grease
3300 RPM
Limiting speed - grease
3300 RPM
Limiting Speed - Oil
3900 RPM
Limiting speed - oil
3900 RPM
Material
Hardened alloy steel
O.D.
170 mm
Oil Hole
w/o Oil Hole
Oil hole
w/o Oil Hole
Operating Temperature Range
-40 to 250 °F
Operating temperature range
-40 to 250 ºF
r (in)
0.0827
r1as max
0.0787 in
Radial Internal Clearance
C3
Radial internal clearance
C3
Static Load Rating
96500 lbf
Static load rating
96500 lbf
Tolerance
ISO class 0 (RBEC 1)
Type
Cylindrical Roller Bearing
Technical Specifications
Type | Cylindrical Roller Bearing |
Bore Type | Round |
Material | Hardened Alloy Steel |
Cage Material | High Strength Machined Brass Rivetless w/ square holes |
Limiting Speed - Oil | 3900 RPM |
Limiting Speed - Grease | 3300 RPM |
Configuration | One |
Tolerance | ISO Class 0 (RBEC 1) |
Oil Hole | w/o Oil Hole |
Radial Internal Clearance | C3 |
Static Load Rating | 96500 lbf430000 N430.00 kN |
Dynamic Load Rating | 80000 lbf355000 N355.00 kN |
Enclosure | Open |
Operating Temperature Range | -40 to 250 F-40 to 120 C |
Dimensional Specifications
| |
d | 3.1496 in80.000 mm |
D | 6.6929 in170.000 mm |
B | 2.2835 in58.000 mm |
Fw | 3.9764 in101.000 mm |
J | 4.3701 in111.000 mm |
r | 0.0827 in2.100 mm |
da min | 3.5827 in91.000 mm |
Da max | 6.2598 in159.000 mm |
r1as max | 0.0787 in2.000 mm |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | MROSupply Fasteners |
| Model | FSTPCK-211361 |
| Brand | SMC |
| Model | MNB-F03 |
| Brand | ABB |
| Model | ACH550-UH-017A-2-K465 |
| Brand | Gates Rubber |
| Model | XH-100-100-LLUKNB |
