We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
NTN BL310C3 is a single-row deep groove ball bearing with a 50 mm straight bore. It features an open enclosure, a steel cage, and C3 internal clearance. Constructed from high carbon chrome steel, this bearing is suitable for general industrial rotating equipment such as electric motors, pumps, and fans.
MODEL BL310C3
$134.96 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
B (in)
1.0630
Ball Material
Steel
Ball material
Steel
Bore Type
Round
Bore type
Round
Cage Material
Steel
Cage material
Steel
Cage Type
Pressed
Cage type
Pressed
Configuration
One
D (in)
4.3307
d (in)
1.9685
Da max
3.9764 in
da max
2.6969 in
da min
2.3228 in
Enclosure
Open
I.D.
50 mm
Limiting Speed - Grease
5700 RPM
Limiting speed - grease
5700 RPM
Limiting Speed - Oil
6700 RPM
Limiting speed - oil
6700 RPM
Material
High carbon chrome steel
O.D.
110 mm
Operating Temperature Range
-40 to 250 °F
Operating temperature range
-40 to 250 ºF
Precision
Class 0
r (in)
0.0787
r1
0.0197 in
Radial Internal Clearance
C3
Radial internal clearance
C3
Seal material
None
Seal type
None
Type
Deep Groove Ball Bearing
Technical Specifications
Type | Deep Groove Ball Bearing |
|---|---|
Bore Type | Round |
Material | High Carbon Chrome Steel |
Cage Type | Pressed |
Cage Material | Steel |
Ball Material | Steel |
Limiting Speed - Oil | 6700 RPM |
Limiting Speed - Grease | 5700 RPM |
Seal Type | None |
Seal Material | None |
Precision | Class 0 |
Configuration | One |
Radial Internal Clearance | C3 |
Enclosure | Open |
Operating Temperature Range | -40 to 250 F-40 to 120 C |
Dimensional Specifications
| |
d | 1.9685 in50.000 mm |
|---|---|
D | 4.3307 in110.000 mm |
B | 1.0630 in27.000 mm |
r | 0.0787 in2.000 mm |
r1 | 0.0197 in0.500 mm |
da min | 2.3228 in59.000 mm |
da max | 2.6969 in68.500 mm |
Da max | 3.9764 in101.000 mm |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
| Brand | Gates Rubber |
| Model | TP160XL037 |
| Brand | Boston Gear |
| Model | 738-30F-H |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-781300 |
