We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
BUNTING CBM032040025 32 x 40 x 25 C93200(SAE660) Metric Plain Bearing C93200(SAE660) Metric Plain Bearing
MODEL CBM032040025
Contact supplier for technical support on: 888 286 8464
$8.13 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
I.D.
32 mm
O.D.
40 mm
Bunting Bearings Llc Bunting&Reg; CBM032040025
UPC: 717905208799 | UNSPSC: 31171509 | GTIN:
Bearings > Plain & Sleeve Bearings > Plain Sleeve & Flanged Bearings
Bunting® Plain Sleeve Bearing, 32 mm Bore, 40 mm OD, 25 mm Width, -450 to 500 deg F, 4000 psi Maximum, 750 sfpm Maximum Velocity, 75000 Maximum PV, Cast Bronze Bearing
Features:
- C93200 is a general purpose bearing, bushing and washer material with good anti-frictional properties, moderate load-carrying ability and good machinability
Specs:
- Maximum PV Rating: 75000
- Maximum Velocity: 750 sfpm
- Bearing Material: Cast Bronze
- Temperature Rating: -450 to 500 deg F
- Maximum Pressure: 4000 psi
- Bore Diameter: 32 mm
- Outside Diameter: 40 mm
- Width: 25 mm
Certifications/Standards:
ANSI/ASQC Z1.4 | CBSA/NFFS/PTDA Association | OSHA Standard 29 CFR 1910.1200 | SAE 660 | PROP65: This product can expose you to chemicals including nickel & lead, which is known to the state of California to cause cancer and lead, which is known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Warranty:
90 Days
SKU: 578747
Shaft sleeves/bunting
Really Good Price and Good Quality from what I can see. We use as shaft sleeves on electric pumps. Will order again!
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | StrongHold |
| Model | 46-W-245-SS |
| Brand | System Plast |
| Model | FT-25-PA-JMRH-GR |
| Brand | ABB |
| Model | MA2.5-5-1SNA115486R0300 |
SKU: 578747
Shaft sleeves/bunting
Really Good Price and Good Quality from what I can see. We use as shaft sleeves on electric pumps. Will order again!
Read more