We never sell your data to third parties
PCI VTRE-7.50 V-Groove Track Roller Eccentric Stud Type with 7.500" roller diameter. Features Timken tapered roller double row bearing, rubber dual lip seals, and 2 1/2-12 thread. Dynamic load rating 169055.5 N, static load rating 250090 N. Eccentric offset 1.524 mm. Carbon steel construction. Sealed for life lubrication.
MODEL VTRE-7.50
Contact supplier for technical support on: 800-323-0966
$915.88 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
Axial dynamic load rating
3.443 kN, 3442.697 N
Axial static load rating
172.393 kN, 172393.000 N
Bearing Type
Timken tapered roller
Dynamic load rating
169055.500 N
Eccentric diameter
79.38 mm
Eccentric length
73.0 mm
Eccentric offset
1.524 mm
Enclosure
Rubber dual lip
Groove center
38.1 mm
Hex size
15.88 mm
Lubrication type
Sealed for life
Material
Carbon steel
Max operating temperature
121.1 C
Max speed rating
1,250 rpm
Maximum clamping torque
169 Nm
Number of rows
Double
Outside ring shape
V-grooved
Point diameter
152.4 mm
Roller diameter
190.500 mm
Roller material
Carbon steel
Roller width
74.676 mm
Series
VTRE
Shoulder diameter
91.440 mm
Shoulder length
1.6 mm
Static load rating
250090.000 N
Stud capacity
331748 N
Stud diameter
63.500 mm
Stud length
139.700 mm
Stud material
Carbon steel
Stud type
Eccentric
Thread length
66.675 mm
Thread size
2 1/2 - 12
Total width
76.200 mm
Type
V-grooved
CAD disclaimer: Every reasonable effort has been made to ensure the accuracy of the information contained herein, however no liability is accepted for errors, omissions or for any other reason. Specifications are subject to change without notice.
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Dormer Pramet |
| Model | 5978027 |
| Brand | Lenox Tools |
| Model | 1456107A1616 |
