We never sell your data to third parties
Smith Bearing CR-9/16-BC is a stud-type cam follower with 9/16" roller OD and hex head drive. It features a full complement needle roller design for high radial load capacity in limited space. The unsealed, non-crowned configuration suits applications requiring compact, low-friction track guidance.
MODEL CR-9/16-BC
Contact supplier for technical support on: 800-932-0076
$22.28 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Cam Follower Needle Roller Bearing The CR-9/16-BC Stud Type Hex Head Slot Crowned Needle Bearing Cam Follower from Smith Bearings is engineered for high-performance applications in both aerospace and industrial sectors. This precision bearing is designed to provide superior load capacity and operational reliability, making it an essential component for various machinery and equipment.
Key Features
| Precision Engineering | Crafted with needle roller design that minimizes friction and enhances load-carrying capabilities, ensuring smooth operation. |
|---|---|
| Crowned Profile | The crowned outer surface allows for misalignment compensation, improving performance in dynamic applications. |
| Durable Construction | Manufactured from high-quality materials that resist wear and corrosion, promoting longevity even in demanding environments. |
| Hex Head Slot Design | Facilitates easy mounting and secure installation, suitable for various assembly configurations. |
| Compatible Sizes | Available in both inch and metric sizes, accommodating a wide range of applications. |
Applications
| Industrial Machinery | Ideal for conveyors, automation equipment, and other heavy-duty machinery where reliability and performance are critical. |
|---|---|
| Aerospace | Approved for use in aerospace applications, ensuring compliance with stringent industry standards, including AS 9100. |
| Robotics and Automation | Provides precision motion control in robotic arms and automated systems. |
Benefits
| Enhanced Load Capacity | The needle roller design allows for higher load ratings, reducing the risk of failure in high-thrust load applications. |
|---|---|
| Operational Efficiency | Reduced friction leads to lower energy consumption, contributing to more efficient machinery operation. |
| Reliability | Backed by Smith Bearings' commitment to quality and innovation, ensuring consistent performance in critical applications. |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
Disclaimer: The return policy information shown below is merely a copy of the text as stated in IDC-USA's Annual Return Policy.
File: http://documents.mrosupply.com/file_uploads/IDCreturnpolicy.pdf
ANNUAL RETURN POLICY PURPOSE: The purpose of IDC-USA’s Annual Return Policy is to allow IDC Distributors the opportunity to return salable stock merchandise of current design that may not have adequate “turns” and replace it with faster moving product.
ACCEPTANCE: IDC Owner-Distributors shall submit a return list to IDC-USA with all pertinent information as follows:
a. Product brand name
b. Quantity
c. IDC-USA’s product identification number
d. Corresponding distributor’s P.O. number or invoice number Acceptance of return shall be subject to IDC-USA inventory levels and manufacturer’s restrictions.
AUTHORIZATION: The return shall be audited and the IDC Owner-Distributor will receive an approved return list with a Return Material Authorization (RMA) number assigned to it. RETURN DATE: Each owner-distributor shall be assigned a month during which they shall be entitled to make a single annual return.
Product Qualification: All products returned must be:
a. On the current price list
b. In good resale condition
c. In the original packaging
d. Purchased from IDC-USA within 3 years of the return
e. Stock items only; no special order items
f. Only those items which have been approved
VALUE: The IDC Owner-Distributor shall receive a credit not to exceed 5% of the owner-distributor’s prior year annual purchases from the IDC Distribution Center. Credit received shall be the actual purchase price or price in effect at the time of the return, whichever is lowest, less applicable restocking charges. Additionally, all annual returns must have a minimum return value of $100.
RESTOCKING CHARGES: There will be a 15% restocking fee unless return is offset by a noncancelable order of equal value to be placed at the time of return. All items received that are not in their original box shall be subject to an additional 15% repackaging fee.
FREIGHT: Returns will be made freight prepaid by the IDC Owner-Distributor to the IDC Distribution Center. The packing slip and all cartons must reference the RMA number. The owner-distributor will be notified of any items received that do not qualify as set forth above. Those items will not be credited and shall be scrapped unless the IDC Owner-Distributor directs otherwise and assumes any additional transportation charges.