We never sell your data to third parties
Smith Bearing MCR-35-SB metric stud-type cam follower with 35mm roller OD, M16x1.5 thread, and 32.5mm stud length. Sealed design with full complement needle rollers. Dynamic load rating 12900 N, static load rating 19000 N. Hex head slot drive. Suitable for track roller applications.
MODEL MCR-35-SB
Contact supplier for technical support on: 800-932-0076
$76.57 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Additional note4
Tolerance for C Raceway Width is +0.00/-0.12 mm
B2
8
Basic Dynamic Load Rating (newtons)
12900
Basic Load Rating (Track Roller) Static (newtons)
14100
Basic Static Load Rating (newtons)
19000
C1
0.8
d2
27
M
6
M1
3
Mass (grams)
182
Max. Speed (rpm)
7000
Overall Length (mm)
52
Roller O.D. (mm)
35
Roller Width (mm)
18
rs
0.60
SMITH Bearing Number
MCR-35-SB
Stud Dia. (mm)
16
Stud Length (mm)
32.5
Thread (mm)
M16 x 1.5
Thread Length (mm)
17
Track Roller Dynamic Load(newtons)
9700
Cam Follower Needle Roller Bearing - MCR-35-SB The MCR-35-SB Caged Stud Type Hex Head Slot Sealed Crowned Metric Needle Bearing Cam Follower from Smith Bearings is engineered for precision and reliability in demanding applications. This cam follower is specifically designed to withstand high loads while providing smooth operation, making it an essential component in various industrial and aerospace applications.
Key Features
| Caged Design | Features a caged assembly that enhances needle retention and reduces friction during operation. |
|---|---|
| Sealed Construction | Equipped with a sealed design to prevent contamination from dirt and moisture, ensuring long-lasting performance. |
| Crowned Profile | The crowned outer surface allows for improved contact with the track, minimizing wear and ensuring smooth operation. |
| Metric Sizing | Designed to meet metric specifications, making it suitable for a variety of applications in international markets. |
| Durable Materials | Constructed from high-quality materials that provide resistance to wear, ensuring longevity in challenging environments. |
Applications
| Industrial Machinery | Perfect for use in conveyor systems, robotics, and other machinery requiring reliable motion control. |
|---|---|
| Aerospace | Approved for use in aerospace applications, this cam follower meets stringent industry standards for safety and performance. |
| Automotive | Ideal for automotive assembly lines and other applications where precision and reliability are critical. |
Benefits
| Enhanced Durability | The sealed design and high-quality materials provide exceptional durability, reducing maintenance needs and downtime. |
|---|---|
| Smooth Operation | The crowned profile and caged design ensure consistent performance, resulting in lower friction and wear. |
| Versatility | Suitable for a wide range of applications, this cam follower can easily adapt to various operational requirements. |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Orbit Industries |
| Model | HL20S-12V-WH |
| Brand | Timken |
| Model | 3MMVC9311HX SUL |
Disclaimer: The return policy information shown below is merely a copy of the text as stated in IDC-USA's Annual Return Policy.
File: http://documents.mrosupply.com/file_uploads/IDCreturnpolicy.pdf
ANNUAL RETURN POLICY PURPOSE: The purpose of IDC-USA’s Annual Return Policy is to allow IDC Distributors the opportunity to return salable stock merchandise of current design that may not have adequate “turns” and replace it with faster moving product.
ACCEPTANCE: IDC Owner-Distributors shall submit a return list to IDC-USA with all pertinent information as follows:
a. Product brand name
b. Quantity
c. IDC-USA’s product identification number
d. Corresponding distributor’s P.O. number or invoice number Acceptance of return shall be subject to IDC-USA inventory levels and manufacturer’s restrictions.
AUTHORIZATION: The return shall be audited and the IDC Owner-Distributor will receive an approved return list with a Return Material Authorization (RMA) number assigned to it. RETURN DATE: Each owner-distributor shall be assigned a month during which they shall be entitled to make a single annual return.
Product Qualification: All products returned must be:
a. On the current price list
b. In good resale condition
c. In the original packaging
d. Purchased from IDC-USA within 3 years of the return
e. Stock items only; no special order items
f. Only those items which have been approved
VALUE: The IDC Owner-Distributor shall receive a credit not to exceed 5% of the owner-distributor’s prior year annual purchases from the IDC Distribution Center. Credit received shall be the actual purchase price or price in effect at the time of the return, whichever is lowest, less applicable restocking charges. Additionally, all annual returns must have a minimum return value of $100.
RESTOCKING CHARGES: There will be a 15% restocking fee unless return is offset by a noncancelable order of equal value to be placed at the time of return. All items received that are not in their original box shall be subject to an additional 15% repackaging fee.
FREIGHT: Returns will be made freight prepaid by the IDC Owner-Distributor to the IDC Distribution Center. The packing slip and all cartons must reference the RMA number. The owner-distributor will be notified of any items received that do not qualify as set forth above. Those items will not be credited and shall be scrapped unless the IDC Owner-Distributor directs otherwise and assumes any additional transportation charges.