We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Smith Bearing MCR-35-SC is a metric stud-type cam follower with 35mm roller OD, M16x1.5 thread, and caged needle bearing design. It features a screwdriver slot drive, cylindrical outer ring, and sealed construction. Dynamic load rating is 12,900 N, static load rating is 19,000 N. Suitable for track roller applications.
MODEL MCR-35-SC
Contact supplier for technical support on: 800-932-0076
$76.57 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Additional note4
Tolerance for C Raceway Width is +0.00/-0.12 mm
B2
8
Basic Dynamic Load Rating (newtons)
12900
Basic Load Rating (Track Roller) Static (newtons)
14100
Basic Static Load Rating (newtons)
19000
C1
0.8
d2
27
M
6
M1
3
Mass (grams)
182
Max. Speed (rpm)
7000
Overall Length (mm)
52
Roller O.D. (mm)
35
Roller Width (mm)
18
rs
0.60
SMITH Bearing Number
MCR-35-SC
Stud Dia. (mm)
16
Stud Length (mm)
32.5
Thread (mm)
M16 x 1.5
Thread Length (mm)
17
Track Roller Dynamic Load(newtons)
9700
Cam Followers The MCR-35-SC Caged Stud Type Screwdriver Slot Cylindrical Sealed Metric Needle Bearing Cam Follower by Smith Bearings is engineered for precision and durability in demanding industrial applications. With over 50 years of experience in the bearing industry, Smith Bearings offers a cam follower designed to meet the rigorous performance requirements of both aerospace and industrial sectors.
Key Features
| Caged Design | Ensures smooth operation by preventing needle roller skidding, enhancing load distribution and extending service life. |
|---|---|
| Sealed Construction | Protects against contaminants, ensuring reliable performance in harsh environments. |
| Metric Dimensions | Designed to fit standard metric applications, making it versatile for various machinery and equipment. |
| Screwdriver Slot | Facilitates easy installation and adjustment, reducing downtime and improving maintenance efficiency. |
| High Load Capacity | Capable of handling significant axial and radial loads, making it suitable for high-thrust applications. |
Applications
| Industrial Machinery | Ideal for use in conveyor systems, packaging equipment, and other machinery requiring reliable motion control. |
|---|---|
| Aerospace | Approved for aerospace applications, ensuring compliance with stringent industry standards. |
| Robotics | Effective in robotic arms and automated systems needing precision movement and durability. |
Benefits
| Enhanced Durability | The sealed design provides added protection against dust and moisture, leading to a longer operational life. |
|---|---|
| Operational Efficiency | The cam follower’s caged needle design minimizes friction, promoting smooth and efficient operation. |
| Versatile Compatibility | With metric sizing, this cam follower easily integrates into a wide range of applications, reducing the need for modifications. |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Hubbell Wiring |
| Model | HBTFRMINS0612WHT |
| Brand | Hubbell Wiring |
| Model | S1R10CENTERDIV |
| Brand | Reelcraft |
| Model | CA33112 L |
| Brand | Jason Industrial |
| Model | SPZ1112 |
Disclaimer: The return policy information shown below is merely a copy of the text as stated in IDC-USA's Annual Return Policy.
File: http://documents.mrosupply.com/file_uploads/IDCreturnpolicy.pdf
ANNUAL RETURN POLICY PURPOSE: The purpose of IDC-USA’s Annual Return Policy is to allow IDC Distributors the opportunity to return salable stock merchandise of current design that may not have adequate “turns” and replace it with faster moving product.
ACCEPTANCE: IDC Owner-Distributors shall submit a return list to IDC-USA with all pertinent information as follows:
a. Product brand name
b. Quantity
c. IDC-USA’s product identification number
d. Corresponding distributor’s P.O. number or invoice number Acceptance of return shall be subject to IDC-USA inventory levels and manufacturer’s restrictions.
AUTHORIZATION: The return shall be audited and the IDC Owner-Distributor will receive an approved return list with a Return Material Authorization (RMA) number assigned to it. RETURN DATE: Each owner-distributor shall be assigned a month during which they shall be entitled to make a single annual return.
Product Qualification: All products returned must be:
a. On the current price list
b. In good resale condition
c. In the original packaging
d. Purchased from IDC-USA within 3 years of the return
e. Stock items only; no special order items
f. Only those items which have been approved
VALUE: The IDC Owner-Distributor shall receive a credit not to exceed 5% of the owner-distributor’s prior year annual purchases from the IDC Distribution Center. Credit received shall be the actual purchase price or price in effect at the time of the return, whichever is lowest, less applicable restocking charges. Additionally, all annual returns must have a minimum return value of $100.
RESTOCKING CHARGES: There will be a 15% restocking fee unless return is offset by a noncancelable order of equal value to be placed at the time of return. All items received that are not in their original box shall be subject to an additional 15% repackaging fee.
FREIGHT: Returns will be made freight prepaid by the IDC Owner-Distributor to the IDC Distribution Center. The packing slip and all cartons must reference the RMA number. The owner-distributor will be notified of any items received that do not qualify as set forth above. Those items will not be credited and shall be scrapped unless the IDC Owner-Distributor directs otherwise and assumes any additional transportation charges.