We never sell your data to third parties
Smith Bearing MCRV-26-SB metric full-complement stud-type cam follower, 26mm roller OD, M10x1 thread, hex head slot seal. 12mm roller width, 23mm stud length, 36mm overall length. Dynamic load rating 8600 N, static load rating 12900 N, track roller dynamic load 7300 N. Maximum speed 6000 rpm.
MODEL MCRV-26-SB
Contact supplier for technical support on: 800-932-0076
$54.69 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Additional note4
Tolerance for C Raceway Width is +0.00/-0.12 mm
B2
N/A
Basic Dynamic Load Rating (newtons)
8600
Basic Load Rating (Track Roller) Static (newtons)
11300
Basic Static Load Rating (newtons)
12900
C1
0.6
d2
17
M
4
M1
N/A
Mass (grams)
65
Max. Speed (rpm)
6000
Overall Length (mm)
36
Roller O.D. (mm)
26
Roller Width (mm)
12
rs
0.30
SMITH Bearing Number
MCRV-26-SB
Stud Dia. (mm)
10
Stud Length (mm)
23
Thread (mm)
M10 x 1
Thread Length (mm)
12
Track Roller Dynamic Load(newtons)
7300
Bearings - Cam Followers The MCRV-26-SB Full Compliment Stud Type Hex Head Slot Sealed Metric Needle Bearing Cam Follower from Smith Bearings is designed for high-performance applications where precision and reliability are paramount. This cam follower features a robust construction ideal for supporting radial and axial loads, making it suitable for various industrial and aerospace environments.
Key Features
| Full Complement Design | Incorporates a full complement of needle rollers providing maximum load-carrying capacity while minimizing friction. |
|---|---|
| Hex Head Slot | Designed for easy mounting with a hex head slot, allowing for secure installation and adjustment. |
| Sealed Construction | Equipped with seals to prevent contamination and retain lubrication, ensuring longevity and consistent performance. |
| Metric Specifications | Engineered to meet metric standards, providing compatibility with a wide range of applications. |
| Durable Materials | Constructed with high-quality materials that enhance resistance to wear and corrosion, extending the product's operational life. |
Applications
| Industrial Automation | Ideal for use in conveyor systems, robotics, and automated machinery where precision tracking is essential. |
|---|---|
| Aerospace | Approved for applications in aircraft engines and airframes, meeting stringent industry standards for safety and reliability. |
| Heavy Machinery | Suitable for construction equipment and other heavy-duty machinery where robust performance is required. |
Benefits
| Enhanced Load Capacity | The full complement design allows for greater load-bearing capabilities, making it suitable for demanding applications. |
|---|---|
| Reduced Maintenance | The sealed design minimizes the ingress of contaminants, reducing the need for frequent maintenance and downtime. |
| Versatile Compatibility | Its metric specifications make it compatible with a wide range of machinery, providing flexibility in design and implementation. |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | NSK Bearings |
| Model | NAH25AN-K1P |
| Brand | Smith Bearings |
| Model | CR-2-1/4-B |
| Brand | Champion |
| Model | 328X13/16-6-32 |
| Brand | Orbit Industries |
| Model | 2030-F-SA |
Disclaimer: The return policy information shown below is merely a copy of the text as stated in IDC-USA's Annual Return Policy.
File: http://documents.mrosupply.com/file_uploads/IDCreturnpolicy.pdf
ANNUAL RETURN POLICY PURPOSE: The purpose of IDC-USA’s Annual Return Policy is to allow IDC Distributors the opportunity to return salable stock merchandise of current design that may not have adequate “turns” and replace it with faster moving product.
ACCEPTANCE: IDC Owner-Distributors shall submit a return list to IDC-USA with all pertinent information as follows:
a. Product brand name
b. Quantity
c. IDC-USA’s product identification number
d. Corresponding distributor’s P.O. number or invoice number Acceptance of return shall be subject to IDC-USA inventory levels and manufacturer’s restrictions.
AUTHORIZATION: The return shall be audited and the IDC Owner-Distributor will receive an approved return list with a Return Material Authorization (RMA) number assigned to it. RETURN DATE: Each owner-distributor shall be assigned a month during which they shall be entitled to make a single annual return.
Product Qualification: All products returned must be:
a. On the current price list
b. In good resale condition
c. In the original packaging
d. Purchased from IDC-USA within 3 years of the return
e. Stock items only; no special order items
f. Only those items which have been approved
VALUE: The IDC Owner-Distributor shall receive a credit not to exceed 5% of the owner-distributor’s prior year annual purchases from the IDC Distribution Center. Credit received shall be the actual purchase price or price in effect at the time of the return, whichever is lowest, less applicable restocking charges. Additionally, all annual returns must have a minimum return value of $100.
RESTOCKING CHARGES: There will be a 15% restocking fee unless return is offset by a noncancelable order of equal value to be placed at the time of return. All items received that are not in their original box shall be subject to an additional 15% repackaging fee.
FREIGHT: Returns will be made freight prepaid by the IDC Owner-Distributor to the IDC Distribution Center. The packing slip and all cartons must reference the RMA number. The owner-distributor will be notified of any items received that do not qualify as set forth above. Those items will not be credited and shall be scrapped unless the IDC Owner-Distributor directs otherwise and assumes any additional transportation charges.