We never sell your data to third parties
Smith Bearing MCRV-90-BC metric full-complement stud-type cam follower with 90mm roller OD and hex head drive. Cylindrical roller design features a full complement of needle rollers for maximum load capacity in compact spaces. Unsealed and uncrowned, suitable for moderate-speed, high-load applications where lubrication is readily available.
MODEL MCRV-90-BC
Contact supplier for technical support on: 800-932-0076
$251.17 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
CAM FOLLOWERS The MCRV-90-BC Full Compliment Stud Type Hex Head Slot Cylindrical Metric Needle Bearing Cam Follower from Smith Bearings is engineered for precision and reliability, making it an ideal solution for various industrial and aerospace applications. This cam follower is specifically designed to provide optimal load distribution and minimize friction, ensuring smooth operation in demanding environments.
Key Features
| Full Complement Design | Incorporates a complete set of needle rollers, maximizing load capacity and reducing wear over time. |
|---|---|
| Hex Head Slot Configuration | Allows for easy installation and secure fastening, enhancing assembly efficiency. |
| Cylindrical Metric Dimensions | Designed to fit standard metric sizes, ensuring compatibility with a wide range of applications. |
| High-Quality Materials | Manufactured from durable steel, providing exceptional strength and resistance against deformation. |
| Precision Engineering | Crafted to meet stringent quality standards, ensuring consistent performance and longevity in critical applications. |
Applications
| Industrial Machinery | Suitable for use in conveyor systems, assembly lines, and other heavy-duty machinery where high load capacity is essential. |
|---|---|
| Aerospace Engineering | Approved for use in aerospace applications, including engine and airframe assembly, where reliability and precision are crucial. |
| Robotics and Automation | Ideal for robotic arms and automated systems requiring precise motion control and durability. |
Benefits
| Enhanced Load Capacity | The full complement design allows for higher load-bearing capabilities compared to standard bearings, making it suitable for heavy applications. |
|---|---|
| Reduced Friction | Engineered for smooth operation, which minimizes energy loss and prolongs the lifespan of connected components. |
| Versatile Compatibility | The metric sizing and standard configuration make this cam follower adaptable to a variety of machines and systems across industries. |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | MROSupply Fasteners |
| Model | FSTPCK-798361 |
| Brand | Champion |
| Model | CM98-3/4X11X16 |
Disclaimer: The return policy information shown below is merely a copy of the text as stated in IDC-USA's Annual Return Policy.
File: http://documents.mrosupply.com/file_uploads/IDCreturnpolicy.pdf
ANNUAL RETURN POLICY PURPOSE: The purpose of IDC-USA’s Annual Return Policy is to allow IDC Distributors the opportunity to return salable stock merchandise of current design that may not have adequate “turns” and replace it with faster moving product.
ACCEPTANCE: IDC Owner-Distributors shall submit a return list to IDC-USA with all pertinent information as follows:
a. Product brand name
b. Quantity
c. IDC-USA’s product identification number
d. Corresponding distributor’s P.O. number or invoice number Acceptance of return shall be subject to IDC-USA inventory levels and manufacturer’s restrictions.
AUTHORIZATION: The return shall be audited and the IDC Owner-Distributor will receive an approved return list with a Return Material Authorization (RMA) number assigned to it. RETURN DATE: Each owner-distributor shall be assigned a month during which they shall be entitled to make a single annual return.
Product Qualification: All products returned must be:
a. On the current price list
b. In good resale condition
c. In the original packaging
d. Purchased from IDC-USA within 3 years of the return
e. Stock items only; no special order items
f. Only those items which have been approved
VALUE: The IDC Owner-Distributor shall receive a credit not to exceed 5% of the owner-distributor’s prior year annual purchases from the IDC Distribution Center. Credit received shall be the actual purchase price or price in effect at the time of the return, whichever is lowest, less applicable restocking charges. Additionally, all annual returns must have a minimum return value of $100.
RESTOCKING CHARGES: There will be a 15% restocking fee unless return is offset by a noncancelable order of equal value to be placed at the time of return. All items received that are not in their original box shall be subject to an additional 15% repackaging fee.
FREIGHT: Returns will be made freight prepaid by the IDC Owner-Distributor to the IDC Distribution Center. The packing slip and all cartons must reference the RMA number. The owner-distributor will be notified of any items received that do not qualify as set forth above. Those items will not be credited and shall be scrapped unless the IDC Owner-Distributor directs otherwise and assumes any additional transportation charges.