We never sell your data to third parties
Smith Bearing MCRV-80-SC is a metric full-complement stud-type cam follower with 80mm roller OD, M30x1.5 thread, and screwdriver slot drive. It features a cylindrical outer ring, sealed design, and needle bearing construction. Dynamic load rating is 60000 N, static load rating is 142000 N. Overall length is 100mm, stud length is 63mm, and roller width is 35mm.
MODEL MCRV-80-SC
Contact supplier for technical support on: 800-932-0076
$205.09 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Additional note4
Tolerance for C Raceway Width is +0.00/-0.12 mm
B2
15
Basic Dynamic Load Rating (newtons)
60000
Basic Load Rating (Track Roller) Static (newtons)
120000
Basic Static Load Rating (newtons)
142000
C1
1
d2
53
M
8
M1
4
Mass (grams)
1621
Max. Speed (rpm)
1700
Overall Length (mm)
100
Roller O.D. (mm)
80
Roller Width (mm)
35
rs
1.1
SMITH Bearing Number
MCRV-80-SC
Stud Dia. (mm)
30
Stud Length (mm)
63
Thread (mm)
M30x1.5
Thread Length (mm)
32
Track Roller Dynamic Load(newtons)
49500
Cam Followers The Smith Bearings MCRV-80-SC is a precision-engineered cam follower designed for optimal performance in demanding applications. This full complement stud type needle bearing features a screwdriver slot and a cylindrical sealed design, making it a reliable choice for various industrial and aerospace operations.
Key Features
| Design | Full complement stud type construction maximizes load-carrying capacity and minimizes friction for enhanced efficiency. |
|---|---|
| Dimensions | Engineered to meet metric specifications, ensuring compatibility with a wide range of machinery and equipment. |
| Seal Type | Cylindrical sealed design protects against contaminants, promoting longevity and reliability in harsh environments. |
| Material | Constructed from high-strength materials for durability and resistance to wear, making it suitable for high-load applications. |
| Precision | Manufactured to stringent tolerances, ensuring consistent performance and accuracy in operation. |
Applications
| Industrial Machinery | Ideal for use in conveyor systems, printing presses, and other machinery where precise motion and load support are critical. |
|---|---|
| Aerospace | Meets the rigorous demands of aerospace applications, providing reliable performance in engines and airframes. |
| Compatibility | Designed to work seamlessly with various mechanical systems requiring dependable cam follower solutions. |
Benefits
| Enhanced Performance | Maximizes load capacity and minimizes wear, leading to improved efficiency and reduced maintenance costs. |
|---|---|
| Durability | The sealed design ensures long service life by protecting the internal components from dust and moisture. |
| Versatile Use | Suitable for a wide range of applications across multiple industries, providing flexibility for engineering solutions. |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Smith Bearings |
| Model | BCR-1-3/4-XBC |
| Brand | Smith Bearings |
| Model | YR-1-5/8-C |
| Brand | Timken Belts |
| Model | D270L050 |
| Brand | Smith Bearings |
| Model | MCR-13-S |
Disclaimer: The return policy information shown below is merely a copy of the text as stated in IDC-USA's Annual Return Policy.
File: http://documents.mrosupply.com/file_uploads/IDCreturnpolicy.pdf
ANNUAL RETURN POLICY PURPOSE: The purpose of IDC-USA’s Annual Return Policy is to allow IDC Distributors the opportunity to return salable stock merchandise of current design that may not have adequate “turns” and replace it with faster moving product.
ACCEPTANCE: IDC Owner-Distributors shall submit a return list to IDC-USA with all pertinent information as follows:
a. Product brand name
b. Quantity
c. IDC-USA’s product identification number
d. Corresponding distributor’s P.O. number or invoice number Acceptance of return shall be subject to IDC-USA inventory levels and manufacturer’s restrictions.
AUTHORIZATION: The return shall be audited and the IDC Owner-Distributor will receive an approved return list with a Return Material Authorization (RMA) number assigned to it. RETURN DATE: Each owner-distributor shall be assigned a month during which they shall be entitled to make a single annual return.
Product Qualification: All products returned must be:
a. On the current price list
b. In good resale condition
c. In the original packaging
d. Purchased from IDC-USA within 3 years of the return
e. Stock items only; no special order items
f. Only those items which have been approved
VALUE: The IDC Owner-Distributor shall receive a credit not to exceed 5% of the owner-distributor’s prior year annual purchases from the IDC Distribution Center. Credit received shall be the actual purchase price or price in effect at the time of the return, whichever is lowest, less applicable restocking charges. Additionally, all annual returns must have a minimum return value of $100.
RESTOCKING CHARGES: There will be a 15% restocking fee unless return is offset by a noncancelable order of equal value to be placed at the time of return. All items received that are not in their original box shall be subject to an additional 15% repackaging fee.
FREIGHT: Returns will be made freight prepaid by the IDC Owner-Distributor to the IDC Distribution Center. The packing slip and all cartons must reference the RMA number. The owner-distributor will be notified of any items received that do not qualify as set forth above. Those items will not be credited and shall be scrapped unless the IDC Owner-Distributor directs otherwise and assumes any additional transportation charges.