We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
NTN 6219LLUC3/EM is a 62 series single-row deep groove ball bearing with a 95 mm straight bore. It features double contact rubber seals (NBR), a machined brass cage, and C3 internal clearance. Constructed from high carbon chrome steel, it is designed for electric motors, pumps, and general industrial rotating machinery.
MODEL 6219LLUC3/EM
$343.62 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Axial Static Load Rating
18434 lbf
Axial static load rating
18434 lbf
B (in)
1.2600
Ball Material
Through Hardened Steel
Ball material
Through hardened steel
Bore Type
0
Bore type
0
Cage Material
Pressed Steel
Cage material
Pressed steel
Cage Type
Pressed
Cage type
Pressed
Clearance
C3
Configuration
One
d (in)
3.7400
D (in)
6.6930
Da max
6.2598 in
da max
4.5669 in
Dynamic Load Rating
27203 lbf
Dynamic load rating
27203 lbf
Enclosure
Full Contact Seal - Both Sides
Factor
14.4
Height
6.693
I.D.
95 mm
Length
6.693
Limiting Speed - Grease
2500 RPM
Limiting speed - grease
2500 RPM
Material
High carbon chrome steel
O.D.
170 mm
Operating Temperature Range
-40 to 250 °F
Operating temperature range
-40 to 250 ºF
Outside Ring Type
0
Precision
ISO class 0
r (in)
0.0827
r1
0.0197 in
Radial Dynamic Load Rating
27202 lbf
Radial Internal Clearance
0
Radial internal clearance
0
ras max
0.0787 in
Seal Material
Nitrile Rubber
Seal material
Nitrile rubber
Seal Type
Contact
Seal type
Contact
Static Load Rating
18435 lbf
Static load rating
18435 lbf
Type
Deep Groove Ball Bearing
Width
1.2598
Technical Specifications
Type | Deep Groove Ball Bearing |
Bore Type | Round |
Material | High Carbon Chrome Steel |
Cage Type | Pressed |
Cage Material | Steel |
Ball Material | Steel |
Limiting Speed - Grease | 2500 RPM |
Seal Type | Contact |
Seal Material | Nitrile Rubber |
Precision | ISO Class 0 |
Configuration | One |
Factor | 14.4 |
Radial Internal Clearance | C3 |
Static Load Rating | 18400 lbf82000 N82.00 kN |
Dynamic Load Rating | 24500 lbf109000 N109.00 kN |
Enclosure | Double Sealed |
Weight | 5.754 lb2.610 kg |
Operating Temperature Range | -40 to 250 F-40 to 120 C |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What are the dimensions and typical uses of a 6200 series ball bearing?
A standard 6200 ball bearing has: • 10 mm bore • 30 mm outer diameter • 9 mm width The 6200 series sits within the deep groove ball bearing family and is designed for light to moderate loads at relatively high speeds. You’ll typically find them in electric motors, small gearboxes, pumps, and general industrial equipment. They’re popular because they’re compact, widely available, and cost effective. Different variants exist such as sealed, shielded, or high clearance versions, depending on the application.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
#320638
Brand
SKF Bearing
Model
6219-2RS1/C3
#2301611
Brand
Rollway
Model
6219 2RS C3
#5033977
Brand
NSK Bearings
Model
6219DDUC3
#2175780
Brand
FAG Bearing
Model
6219.2RSR.C3
| Brand | ABB |
| Model | FEM12-1SNA128618R0300 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-774037 |
