We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Koyo 6305RSH2C3 is a 63 series single-row deep groove ball bearing with a 25 mm straight bore. It features a single rubber seal and C3 clearance. The bearing has a 62 mm outside diameter and 17 mm width. Suitable for electric motors, pumps, and general rotating machinery.
MODEL 6305RSH2C3
$46.67 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Cage Type
Pressed Steel
Dynamic Load Rating
32.7 kN
I.D.
25 mm
O.D.
62 mm
Static Load Rating [MAX]
13.4 kN
Width
17 mm
- Best used for moderate to high radial and low axial load applications
- Made with larger balls and uses a special heat treat option (RSH2) that yields 5X life in contaminated environments and 2X life in normal applications
- No loading slot in the races permits applications that see axial loading
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
#320126
Brand
SKF Bearing
Model
6305 RSJEM
#319646
Brand
SKF Bearing
Model
6305-RS1/C3
#5034159
Brand
NSK Bearings
Model
6305DUC3
| Brand | MRO Supply |
| Model | 6410-24-20-O-SS |
| Brand | Turck |
| Model | NI20U-G30-AN4X-H1141 |
| Brand | Bando |
| Model | 1000-S14M-1190 HP |
| Brand | Jason Industrial |
| Model | 2800-14M-85 |
| Brand | Bestorq |
| Model | B170 |
