We never sell your data to third parties
NTN 6202LLBNR 62 series single-row deep groove ball bearing, 15 mm straight bore. Double non-contact rubber seals (LLB) and snap ring for axial retention. Pre-greased for electric motors, pumps, and general rotating machinery.
MODEL 6202LLBNR
This vendor has a minimum order quantity of 5. Order minimum ($) may be applied. Add desired QTY to cart and proceed to checkout to view minimum
$16.10 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Brand Minimum Order Quantity: 5
Typically Ships in: 1 day
Returnable:No
a (in)
0.0811
B (in)
0.4331
Ball Material
Steel
Ball material
Steel
Bore Type
Round
Bore type
Round
Cage Material
Steel
Cage material
Steel
Cage Type
Pressed
Cage type
Pressed
Configuration
One
D (in)
1.3780
d (in)
0.5906
D1
1.3059 in
D2
1.5630 in
da max
0.7874 in
Da max
1.2205 in
da min
0.748 in
Dynamic Load Rating
1930 lbf
Dynamic load rating
1930 lbf
Enclosure
Double Sealed
f (in)
0.0441
Factor
12.7
Height
1.563
I.D.
15 mm
Length
1.563
Limiting Speed - Grease
19000 RPM
Limiting speed - grease
19000 RPM
Material
High carbon chrome steel
O.D.
35 mm
Operating Temperature Range
-40 to 250 °F
Operating temperature range
-40 to 250 ºF
Precision
ISO class 0
r (in)
0.0236
r1
0.0197 in
Radial Internal Clearance
CN
Radial internal clearance
CN
ras max
0.0236 in
Seal Material
Nitrile Rubber
Seal material
Nitrile rubber
Seal Type
Non-Contact
Seal type
Non-Contact
Static Load Rating
810 lbf
Static load rating
810 lbf
Type
Deep Groove Ball Bearing
Technical Specifications
Type | Deep Groove Ball Bearing |
Bore Type | Round |
Material | High Carbon Chrome Steel |
Cage Type | Pressed |
Cage Material | Steel |
Ball Material | Steel |
Limiting Speed - Grease | 19000 RPM |
Seal Type | Non-Contact |
Seal Material | Nitrile Rubber |
Precision | ISO Class 0 |
Configuration | One |
Factor | 12.7 |
Radial Internal Clearance | CN |
Static Load Rating | 810 lbf3600 N3.60 kN |
Dynamic Load Rating | 1740 lbf7750 N7.75 kN |
Enclosure | Double Sealed |
Weight | 0.095 lb0.043 kg |
Operating Temperature Range | -40 to 250 F-40 to 120 C |
Dimensional Specifications
| |
d | 0.5906 in15.000 mm |
D | 1.3780 in35.000 mm |
B | 0.4331 in11.000 mm |
D1 | 1.3059 in33.170 mm |
D2 | 1.5630 in39.700 mm |
a | 0.0811 in2.060 mm |
f | 0.0441 in1.120 mm |
r | 0.0236 in0.600 mm |
r1 | 0.0197 in0.500 mm |
da min | 0.7480 in19.000 mm |
da max | 0.7874 in20.000 mm |
Da max | 1.2205 in31.000 mm |
ras max | 0.0236 in0.600 mm |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What are the dimensions and typical uses of a 6200 series ball bearing?
A standard 6200 ball bearing has: • 10 mm bore • 30 mm outer diameter • 9 mm width The 6200 series sits within the deep groove ball bearing family and is designed for light to moderate loads at relatively high speeds. You’ll typically find them in electric motors, small gearboxes, pumps, and general industrial equipment. They’re popular because they’re compact, widely available, and cost effective. Different variants exist such as sealed, shielded, or high clearance versions, depending on the application.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
#5033622
Brand
NSK Bearings
Model
6202VVNR
| Brand | Pyramex |
| Model | RV110NS |
| Brand | Jason Industrial |
| Model | 580J8 |
| Brand | Nachi Bearing |
| Model | 16010 |
| Brand | Harwal |
| Model | 18 x 35 x 08U41 |
| Brand | SKF Bearing |
| Model | NU 314 ECP |
| Brand | Harwal |
| Model | 45 x 65 x 10U41 |
