We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
The NTN 608ZZC3/EM is a 608 series single-row deep groove ball bearing with an 8 mm straight bore. It features double steel shields (ZZ), a machined brass cage (EM), and C3 internal clearance. Constructed from high carbon chrome steel, this bearing is designed for high-speed applications in power tools, small motors, and precision instruments.
MODEL 608ZZC3/EM
$12.48 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
B (in)
0.2756
Ball Material
Steel
Ball material
Steel
Bore Type
Round
Bore type
Round
Cage Material
Steel
Cage material
Steel
Cage Type
Pressed
Cage type
Pressed
Configuration
One
D (in)
0.8661
d (in)
0.3150
Dynamic Load Rating
830 lbf
Dynamic load rating
830 lbf
Enclosure
Double Shielded
Factor
12.5
I.D.
8 mm
Limiting Speed - Grease
32000 RPM
Limiting speed - grease
32000 RPM
Material
High carbon chrome steel
O.D.
22 mm
Operating Temperature Range
-40 to 250 °F
Operating temperature range
-40 to 250 ºF
Precision
ISO class 0
r (in)
0.0118
Radial Internal Clearance
C3
Radial internal clearance
C3
Seal material
None
Seal type
None
Static Load Rating
315 lbf
Static load rating
315 lbf
Type
Deep Groove Ball Bearing
Technical Specifications
Type | Deep Groove Ball Bearing |
|---|---|
Bore Type | Round |
Material | High Carbon Chrome Steel |
Cage Type | Pressed |
Cage Material | Steel |
Ball Material | Steel |
Limiting Speed - Grease | 32000 RPM |
Seal Type | None |
Seal Material | None |
Precision | ISO Class 0 |
Configuration | One |
Factor | 12.5 |
Radial Internal Clearance | C3 |
Static Load Rating | 315 lbf1400 N1.40 kN |
Dynamic Load Rating | 755 lbf3350 N3.35 kN |
Enclosure | Double Shielded |
Operating Temperature Range | -40 to 250 F-40 to 120 C |
Dimensional Specifications
|
| |
d | 0.3150 in8.000 mm |
|---|---|
D | 0.8661 in22.000 mm |
B | 0.2756 in7.000 mm |
r | 0.0118 in0.300 mm |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
#5033521
Brand
NSK Bearings
Model
608ZZC3
#2175188
Brand
FAG Bearing
Model
608.2Z.C3
