We never sell your data to third parties
NTN 6015LLBC3/EM is a 60 series single-row deep groove ball bearing with a 75 mm straight bore. It features double non-contact rubber seals (LLB), a machined brass cage, and C3 internal clearance. Constructed from high carbon chrome steel, this bearing is suitable for electric motors, pumps, and general industrial rotating machinery.
MODEL 6015LLBC3/EM
$232.70 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
B (in)
0.7874
Ball Material
Steel
Ball material
Steel
Bore Type
Round
Bore type
Round
Cage Material
Steel
Cage material
Steel
Cage Type
Pressed
Cage type
Pressed
Configuration
One
D (in)
4.5276
d (in)
2.9528
Da max
4.2717 in
da max
3.3661 in
da min
3.2087 in
Dynamic Load Rating
9890 lbf
Dynamic load rating
9890 lbf
Enclosure
Double Sealed
Factor
15.8
I.D.
75 mm
Limiting Speed - Grease
5700 RPM
Limiting speed - grease
5700 RPM
Material
High carbon chrome steel
O.D.
115 mm
Operating Temperature Range
-40 to 250 °F
Operating temperature range
-40 to 250 ºF
Precision
ISO class 0
r (in)
0.0433
r1
0.0197 in
Radial Internal Clearance
C3
Radial internal clearance
C3
ras max
0.0394 in
Seal Material
Nitrile Rubber
Seal material
Nitrile rubber
Seal Type
Non-Contact
Seal type
Non-Contact
Static Load Rating
7550 lbf
Static load rating
7550 lbf
Type
Deep Groove Ball Bearing
Technical Specifications
| Type | Deep Groove Ball Bearing |
|---|---|
| Bore Type | Round |
| Material | High Carbon Chrome Steel |
| Cage Type | Pressed |
| Cage Material | Steel |
| Ball Material | Steel |
| Limiting Speed - Grease | 5700 RPM |
| Seal Type | Non-Contact |
| Seal Material | Nitrile Rubber |
| Precision | ISO Class 0 |
| Configuration | One |
| Factor | 15.8 |
| Radial Internal Clearance | C3 |
| Static Load Rating | 7550 lbf33500 N33.50 kN |
| Dynamic Load Rating | 7550 lbf33500 N33.50 kN |
| Enclosure | Double Sealed |
| Operating Temperature Range | -40 to 250 F-40 to 120 C |
Dimensional Specifications
| |
| d | 2.9528 in75.000 mm |
|---|---|
| D | 4.5276 in115.000 mm |
| B | 0.7874 in20.000 mm |
| r | 0.0433 in1.100 mm |
| r1 | 0.0197 in0.500 mm |
| da min | 3.2087 in81.500 mm |
| da max | 3.3661 in85.500 mm |
| Da max | 4.2717 in108.500 mm |
| ras max | 0.0394 in1.000 mm |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
#5033405
Brand
NSK Bearings
Model
6015VVC3
| Brand | Rollway |
| Model | 23038 CA C3 W33 |
| Brand | Dichtomatik |
| Model | 173242VA4 |
| Brand | Gates Rubber |
| Model | 5320-14MGT-40 |
