We never sell your data to third parties
NTN 16012 is a single-row deep groove ball bearing with a 60 mm straight bore. Open type with no seals or shields. Suitable for high-speed applications requiring low friction, such as electric motors, pumps, and general industrial machinery.
MODEL 16012
$26.71 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
B (in)
0.4331
Ball Material
Steel
Ball material
Steel
Bore Type
Round
Bore type
Round
Cage Material
Steel
Cage material
Steel
Cage Type
Pressed
Cage type
Pressed
Configuration
One
D (in)
3.7402
d (in)
2.3622
Da max
3.5827 in
da min
2.5197 in
Dynamic Load Rating
4960 lbf
Dynamic load rating
4960 lbf
Enclosure
Open
Factor
16.3
I.D.
60 mm
Limiting Speed - Grease
7000 RPM
Limiting speed - grease
7000 RPM
Limiting Speed - Oil
8300 RPM
Limiting speed - oil
8300 RPM
Material
High carbon chrome steel
O.D.
95 mm
Operating Temperature Range
-40 to 250 °F
Operating temperature range
-40 to 250 ºF
Precision
Class 0
r (in)
0.0236
Radial Internal Clearance
CN
Radial internal clearance
CN
ras max
0.0236 in
Seal material
None
Seal type
None
Static Load Rating
3930 lbf
Static load rating
3930 lbf
Type
Deep Groove Ball Bearing
Width
11 mm
Technical Specifications
Type | Deep Groove Ball Bearing |
|---|---|
Bore Type | Round |
Material | High Carbon Chrome Steel |
Cage Type | Pressed |
Cage Material | Steel |
Ball Material | Steel |
Limiting Speed - Oil | 8300 RPM |
Limiting Speed - Grease | 7000 RPM |
Seal Type | None |
Seal Material | None |
Precision | Class 0 |
Configuration | One |
Factor | 16.3 |
Radial Internal Clearance | CN |
Static Load Rating | 3950 lbf17500 N17.50 kN |
Dynamic Load Rating | 4500 lbf20000 N20.00 kN |
Enclosure | Open |
| 0.611 lb0.277 kg | |
Operating Temperature Range | -40 to 250 F-40 to 120 C |
Dimensional Specifications
|
| |
d | 2.3622 in60.000 mm |
|---|---|
D | 3.7402 in95.000 mm |
B | 0.4331 in11.000 mm |
r | 0.0236 in0.600 mm |
da min | 2.5197 in64.000 mm |
Da max | 3.5827 in91.000 mm |
ras max | 0.0236 in0.600 mm |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
#208097
Brand
Nachi Bearing
Model
16012
#320491
Brand
SKF Bearing
Model
16012
#2178272
Brand
FAG Bearing
Model
16012
#5030062
Brand
NSK Bearings
Model
16012
| Brand | Hubbell Wiring |
| Model | HBL420HI |
| Brand | Lubriplate |
| Model | L0723-060 |
| Brand | Reiff & Nestor |
| Model | 62073 |
| Brand | FK Bearing |
| Model | JFX4 |
| Brand | Smith Bearings |
| Model | CR-1-X |
| Brand | Red Lion Controls |
| Model | NT24K-10FX2-ST |
| Brand | SKF Bearing |
| Model | 51310 |