We never sell your data to third parties
NTN 2202 self-aligning ball bearing with a 15 mm straight bore. Open enclosure with a steel cage. Constructed from high carbon chrome steel. Designed to accommodate misalignment in applications such as fans, conveyors, and agricultural equipment.
MODEL 2202
This vendor has a minimum order quantity of 2. Order minimum ($) may be applied. Add desired QTY to cart and proceed to checkout to view minimum
$61.07 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Brand Minimum Order Quantity: 2
Typically Ships in: 1 day
Returnable:No
Bearing Type
Self aligning ball bearing
Cage
Steel
Clearance
CN
Enclosure
Open
Height
1.378
I.D.
15 mm
Length
1.378
Material
High carbon chrome steel
O.D.
35 mm
Width
0.5512
Technical Specifications
Type | Self Aligning Ball Bearing |
Bore Type | Cylindrical |
Material | High Carbon Chrome Steel |
Cage Type | Pressed |
Cage Material | Steel |
Ball Material | Steel |
Limiting Speed - Oil | 22000 RPM |
Limiting Speed - Grease | 18000 RPM |
Y1 | 1.30 |
Y2 | 1.90 |
Y0 | 1.30 |
Seal Type | None |
Seal Material | None |
Precision | Class 0 |
Configuration | One |
Radial Internal Clearance | CN |
Static Load Rating | 415 lbf1850 N1.85 kN |
Dynamic Load Rating | 1750 lbf7800 N7.80 kN |
Enclosure | Open |
Operating Temperature Range | -40 to 250 F-40 to 120 C |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
| Brand | NTN Bearing |
| Model | XLS8-3/4SSH |
| Brand | Fasco |
| Model | KIT 100 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-728043 |
| Brand | Bestorq |
| Model | 5VK2000 |