We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
SKF TKBA 40 shaft alignment measuring device for precision alignment of rotating machinery. This bearing maintenance tool reduces bearing wear and vibration by enabling accurate shaft alignment. Suitable for industrial maintenance applications.
MODEL TKBA 40
$2,425.11 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Battery
2x AAA (LR03) Alkaline (incl.)
Battery Life
20 h
Case Dimensions (l X H X W)
260 x 85 x 180 mm
Certifications
Calibration certificate with two year validity
Colour
Grey;Black;Blue
Degree of Protection (IP)
IP 40
Housing
Extruded anodized aluminium;Polyamide endcaps
Laser Line Length (at 2 M)
3 m
Laser Power Class
2
Laser Power Max
1 mW
Laser Type
Visible red line laser
Laser Wavelength
632 nm
Measurement Accuracy Angular (at 2 M)
0.2 °
Measurement Accuracy Offset
0.5 mm
Measurement Distance
50-6000 mm
Mounting
Magnetic, groove mounted (side mounting possible with optional adapter TMEB A2)
Operating Temperature Range
0-40 °C
Pack Height
90 mm
Pack Length
260 mm
Pack Width
184 mm
Recommended Storage Temperature
-20-65 °C
Relative Humidity
10 to 90%, non-condensing
Target Dimensions (l X H X W)
70 x 74 x 61 mm
Target Type
3D target
Target Weight
0.26 kg
Transmitter Dimensions (l X H X W)
70 x 74 x 61 mm
Transmitter Weight
0.33 kg
Belt alignment, pulley groove
The Belt Alignment Tool TKBA 40 aligns V-belt pulleys in the grooves. V guides and powerful magnets allow the TKBA 40 to be fitted in the grooves of the pulley. With only two components, a laser emitting unit and a receiver unit, the belt alignment tool is easy to use and allows fast and accurate belt alignments. The three-dimensional target area on the receiver unit help the easy detection of misalignment as well as its nature; whether it is horizontal, vertical, parallel or a combination of all three.
- Powerful magnets allow fast and easy attachment
- Three-dimensional target area simplifies detection and correction of misalignments
- Facilitates simultaneous adjustment of tension and alignment
- V-guides included for a wide range of V-belt pulleys
- Aligns grooves of a V-belt pulley rather than its face, allowing optimum alignment of pulleys of unequal width or with dissimilar faces
- Special side adaptor for alignments of multi-ribbed and timing belt pulleys as well as sprockets is available as accessory
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Bell & Gossett |
| Model | 102208LF |
| Brand | Winsmith |
| Model | E17MSFS31160FT |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-602067 |
| Brand | Flowtrend |
| Model | 19TR-1003B-3-316L |
Disclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF