We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
SKF 6211 Y/C783 55mm bore deep groove ball bearing with a pressed brass cage. This single-row bearing accommodates radial and moderate axial loads in both directions. Suitable for electric motors, pumps, and general industrial machinery.
MODEL 6211 Y/C783
Returnable:No
Bore Type
Cylindrical
Cage
Sheet metal
Dimension Type
Metric
Inner Diameter (mm)
55.000
Locating Feature Bearing
None
Lubricant (in Bearing)
None
Material/Treatment
Bearing steel
O.D. (in)
3 8/9
Outer Diameter (mm)
100.000
Pack Height
106 mm
Pack Length
104 mm
Pack Width
25 mm
Radial Internal Clearance
C3
Relubrication Feature
Without
Seal Type
N/A
Sealing
None
Width (mm)
21.000
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
| Brand | Ringfeder |
| Model | EKN 100 L=44 |
| Brand | Turck |
| Model | NI4-S12-AP6X-H1141 |
| Brand | Boston Gear |
| Model | SSHF7180W-10KC-B5-HS5-P12 |
| Brand | Coilhose |
| Model | PR316-25B-T |
| Brand | Hubbell Wiring |
| Model | HBT450404SWBK |
Disclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF