We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
The SKF 7003 ACDGA/P4A is a 17mm bore super-precision angular contact ball bearing with a 25° contact angle. It features a non-metallic cage and is rated ABMA Class 9 for high-speed and high-accuracy applications such as machine tool spindles and precision pumps.
MODEL 7003 ACDGA/P4A
$306.10 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Basic Dynamic Load Rating
6.5 kN
Basic Static Load Rating
3.1 kN
Bearing Material
Bearing steel
Bore Diameter
17 mm
Cage
Non-metallic
Coating
Without
Contact Angle
25 °
Contact Type
Normal contact (two-point contact)
Design
High-capacity D
Dimension Type
Metric
Inner Diameter (mm)
17.000
Lubricant
None
Lubricant (in Bearing)
None
Matched Arrangement
Universal
Matched Condition (axial Clearance/ Preload)
Measuring load, class A
Material/Treatment
Bearing steel
Number of Rows
1
O.D. (in)
1 3/8
Outer Diameter (mm)
35.000
Pack Height
47 mm
Pack Length
45 mm
Pack Width
17 mm
Relubrication Feature
Without
Ring Type
One-piece
Sealing
None
Tolerance Class
P4A
Type
Normal contact (two-point contact)
Universal Matching Bearing
Yes, back-to-back (<>), face-to-face (><) or tandem (>>)
Width
10 mm
Width (mm)
10.000
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
#830697
Brand
NTN Bearing
Model
7003HVUJ74
#2177275
Brand
FAG Bearing
Model
B7003E.T.P4S.UL
#5034749
Brand
NSK Bearings
Model
7003A5TRSULP4Y
#5034750
Brand
NSK Bearings
Model
7003A5TYNSULP4Y
| Brand | E-Z Lok |
| Model | 851618-20 |
| Brand | E-Z Lok |
| Model | SK30920 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-451322 |
Disclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF