We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
The SKF 7006 CD/P4ADBC is a 30mm bore angular contact ball bearing with a 15° contact angle, designed for high-speed and high-precision applications. This super-precision bearing features a CD design for optimized internal geometry and is suitable for machine tool spindles and precision spindles.
MODEL 7006 CD/P4ADBC
$737.10 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Basic Dynamic Load Rating
23.4 kN
Basic Static Load Rating
16 kN
Bearing Material
Bearing steel
Bore Diameter
30 mm
Cage
Non-metallic
Coating
Without
Contact Angle
15 °
Contact Type
Normal contact (two-point contact)
Design
High-capacity D
Lubricant
None
Matched Arrangement
Back-to-back <>
Matched Condition (axial Clearance/ Preload)
Moderate preload
Number of Bearings in Matched Set
2
Number of Rows
2
O.D.
55 mm
Pack Height
67 mm
Pack Length
65 mm
Pack Width
44 mm
Ring Type
One-piece inner and outer rings
Sealing
Without
Tolerance Class
P4A
Universal Matching Bearing
No
Width
26 mm
Matched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
- Very high running accuracy
- Very high load carrying capacity
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
#830729
Brand
NTN Bearing
Model
7006CVDUJ94
#5034783
Brand
NSK Bearings
Model
7006CTRDUHP4Y
| Brand | Jason Industrial |
| Model | 187L037UK |
| Brand | Dixon |
| Model | B3800-8-8 |
| Brand | Dixon |
| Model | B3455-12-12 |
Disclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF