We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
The SKF QJ 217 N2MA/C3 is an 85mm bore four-point angular contact ball bearing with C3 clearance and a machined brass cage. Designed for combined radial and axial loads in both directions, it is suitable for pumps, compressors, and gearboxes where space is limited.
MODEL QJ 217 N2MA/C3
$735.72 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Axial Internal Clearance
C3
Basic Dynamic Load Rating
156 kN
Basic Static Load Rating
173 kN
Bearing Material
Bearing steel
Bearing Outer Ring Locating Feature
Locating slot
Bore Diameter
85 mm
Cage
Machined (solid)
Coating
Without
Contact Angle
35 °
Contact Type
Four-point contact
Dimension Type
Metric
Inner Diameter (mm)
85.000
Limiting Speed
7500 r/min
Lubricant
None
Lubricant (in Bearing)
None
Matched Arrangement
No
Material/Treatment
Bearing steel
Number of Rows
1
O.D. (in)
5 8/9
Outer Diameter (mm)
150.000
Pack Height
156 mm
Pack Length
154 mm
Pack Width
32 mm
Relubrication Feature
Without
Ring Type
Two-piece inner ring
Sealing
None
SKF Performance Class
SKF Explorer
Type
Four-point contact
Universal Matching Bearing
No
Width
28 mm
Width (mm)
28.000
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
| Brand | Taylor Pneumatic |
| Model | T-3000A |
| Brand | MRO Supply |
| Model | FS2404-08-04 |
| Brand | Pramet |
| Model | 6753189 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-W54504 |
Disclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF