We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
SKF 305706 C-2Z is a 1-1/6 inch bore deep groove ball bearing with double steel shields. It features a non-metallic cage and is constructed from standard bearing steel. Suitable for general industrial applications requiring low friction and protection from contaminants.
MODEL 305706 C-2Z
$201.15 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Axial Guidance of Outer Ring
Yes
Axial Internal Clearance
Normal
Basic Dynamic Load Rating
27 kN
Basic Static Load Rating
1.7 kN
Bearing Material
Bearing steel
Bearing Part
Complete track roller
Bore Diameter
30 mm
Cage
Non-metallic
Coating
Without
Dimension Type
Metric
Functional Outside Diameter
72 mm
Inner Diameter (mm)
30.000
Limiting Speed
6700 r/min
Lubricant
Grease
Lubricant (in Bearing)
Grease
Matched Arrangement
No
Material/Treatment
Bearing steel
Number of Rows
2
O.D. (in)
2 5/6
Outer Diameter (mm)
72.000
Outer Ring Profile
Cylindrical
Pack Height
78 mm
Pack Length
76 mm
Pack Width
28 mm
Radial Internal Clearance
Not applicable
Relubrication Feature
With
Ring Type
Two-piece inner ring
Rolling Elements
Balls
Sealing
Shield on both sides
Sealing Type
Non-contact
Tolerance Class
Normal
Type
Normal contact (two-point contact)
Width
23.8 mm
Width (mm)
23.800
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
Disclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF